Re: [CAD_CAM_EDM_DRO] capacitor voltage rating ?

Anders,

100 volts will be fine.


Robert Colin Campbell
Bob Campbell Designs
www.Campbelldesigns.com
Mach 2/3 breakout boards
Relay boards
Spindle Speed boards
Stepper motors
Plasma Torch Height control

----- Original Message -----
From: "Anders Wallin" <anders.wallin@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, January 06, 2007 4:15 AM
Subject: [CAD_CAM_EDM_DRO] capacitor voltage rating ?


>
> What voltage rating should I choose for caps to a psu with a 60 VAC
> secondary?
> That will produce about sqrt(2)*60 = 84 VDC (probably a bit more under
> no-load conditions)
>
> The webshop I am looking at has 100 V caps, would that be enough?
>
> Anders
>
> PS. I have some caps rated at 400 V which are for sale if anyone is
> interested. 20 pcs of 680uF and 4 pcs of 1500uF.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>