Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
Posted by
Per Petersson
on 2007-10-19 14:54:58 UTC
Hi Hannu
I realized that I didnt answer your question about what software I am using.
For general modeling Rhino4, for more freeform modeling Maya, for cam I use
rhinocam and someother sw that i am testing out.
I also try to learn Solidworks and Autocad and a bunch more to see what
works best.
Been looking towards VisualMill, but if you like some other sw that you
think would workout pls let me know.
And for the control of the router I think I go with Mach3 since there is so
much people working with it.
best regards
Per
I realized that I didnt answer your question about what software I am using.
For general modeling Rhino4, for more freeform modeling Maya, for cam I use
rhinocam and someother sw that i am testing out.
I also try to learn Solidworks and Autocad and a bunch more to see what
works best.
Been looking towards VisualMill, but if you like some other sw that you
think would workout pls let me know.
And for the control of the router I think I go with Mach3 since there is so
much people working with it.
best regards
Per
----- Original Message -----
From: "hannu" <hvenermo@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, October 19, 2007 12:49 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
> Yes - you can easily have 4 axis with parallel ports.
> Any pc can have 2-3 parallel ports easily - mach3 only supports 2.
> For your needs, you want a 4th axis.
>
> What sw do you plan to use for 3d ? what cam sw ?
>
> Re - used industrial machine.
>
> Its a good option in the states, and maybe sometimes in sweden but not
> likely.
>
> In the us a used industrial machine goes for peanuts i.e. very cheap.
> Also in the uk.
> Not in scandinavia, they just have never been sufficiently common.
>
> You can build to the same quality as an industrial machine, if you want,
> for 1/10th the money.
> But it´s still several thousands of €.
>
>
>> --- In CAD_CAM_EDM_DRO@yahoogroups.com
>> <mailto:CAD_CAM_EDM_DRO%40yahoogroups.com>, hannu <hvenermo@...> wrote:
>> >
>> > Yes, these are bipolar motors that I suggest using. They will give
>> you
>> > the best performance.
>> > The gecko 203v is the best drive you can buy in this price range.
>> > I use them.
>> >
>> > The microstepping comes from the drive and not the motor - the
>> gecko
>> > 203v does 10 microsteps/one step.
>> >
>> > Yes, any switches are possible - the hardware does not "know" what
>> the
>> > switch is for.
>> > You just need an input, on the parallel port, that you can connect
>> the
>> > switch to.
>> >
>> > You can have any number of axis you want to build. You just need 2
>> > outputs for each axis.
>> > One to command the axis to move, this is called the "step" signal,
>> and
>> > it makes the motor move one step.
>> > One to tell the axis which direction to move in, i.e. left or
>> right,
>> > clock or counterclock-wise, this is called the "dir" or direction
>> signal.
>> >
>> > What do you want to build with your cnc router ?
>> >
>> > 4-th axis may not be necessary, or may be very necessary, it
>> depends on
>> > what you want to build. In woodworking, you don´t need a rotary,
>> 4th
>> > axis, for round shapes like circles on a cnc router. You might need
>> it
>> > for engraving, like pool cues, or vases etc.
>> >
>> > Good luck.
>> > >
>> > >
>> > >
>> > > Iam sorry:( but I will get there...
>> > > And you dont mentioned any about the possible 4:th axis, is this
>> > > possible with this configuration.
>> > > I wont home switches, so I know where I am, so is this possible
>> also
>> > > with this.
>> > > Then I wonder, I been recommended bipolar motor with the possible
>> to
>> > > microstepping, are your motors for that?
>> > >
>> >
>> > > I also been thinking of buying Gecko G203V drivers, do they apply
>> or
>> > > should you recommend something else?
>> > > Lots of questions here, hope you have the time, You have been a
>> great
>> > > help so far Thanks a lot.
>> > > Regards
>> > > Per
>> > >
>> > >
>> > >
>> >
>> Hi
>> I cant say how greatful Iam for your input.
>> Been posting on cncforum but never got any answers.
>> I am a sculptor and I been working with 3d and I want to get things
>> from my computer to the real world, visit my website
>> www.perpetersson.se
>> Its comming more 3d there soon...
>> But for the 4:th axis, I want to make pillars and pillar heads, but
>> also negative moulds for concrete, wax etc and also moulds for
>> vacuumforming etc
>> But also work with colleagues ideas, so no 3-axis limits.
>> My friend who is helping me with this project recommended me to buy a
>> used industriel robot 5 6 or 7 axis but I cant afford that.
>>
>> But to the build: Can the computer run 2 parallel port
>> simultaneously, and will 2 parallel port be enough for 4 axis?
>> many thanks
>> Per
>>
>> __._,_
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
> __________ NOD32 2602 (20071018) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
Discussion Thread
kids_and_softball_nut
2007-10-18 07:29:12 UTC
How to convert a Grizzly 1006 Mill to CNC
hannu
2007-10-18 08:58:19 UTC
Re: [CAD_CAM_EDM_DRO] How to convert a Grizzly 1006 Mill to CNC
perolalars
2007-10-18 10:57:59 UTC
Re: How to convert a Grizzly 1006 Mill to CNC
Stephen Wille Padnos
2007-10-18 11:01:27 UTC
Re: [CAD_CAM_EDM_DRO] How to convert a Grizzly 1006 Mill to CNC
Stephen Wille Padnos
2007-10-18 11:02:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
hannu
2007-10-18 13:46:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
David G. LeVine
2007-10-18 16:16:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
perolalars
2007-10-18 18:43:58 UTC
Re: How to convert a Grizzly 1006 Mill to CNC
Todd Meigs
2007-10-18 18:43:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
David G. LeVine
2007-10-18 22:44:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
hannu
2007-10-19 00:25:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
perolalars
2007-10-19 01:42:55 UTC
Re: How to convert a Grizzly 1006 Mill to CNC
hannu
2007-10-19 01:56:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
perolalars
2007-10-19 02:43:28 UTC
Re: How to convert a Grizzly 1006 Mill to CNC
hannu
2007-10-19 03:49:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
David G. LeVine
2007-10-19 11:08:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
Per Petersson
2007-10-19 14:54:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
hannu
2007-10-20 01:09:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
Per Petersson
2007-10-20 03:29:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
hannu
2007-10-20 04:18:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
Per Petersson
2007-10-20 05:14:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
Stephen Wille Padnos
2007-10-20 07:56:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC
hannu
2007-10-22 01:40:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC - usb and other hardware(s)
Per Petersson
2007-10-22 04:38:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC - usb and other hardware(s)
Jon Elson
2007-10-22 10:28:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: How to convert a Grizzly 1006 Mill to CNC - usb and other hardware(s)