CAD CAM EDM DRO - Yahoo Group Archive

Re: Sherline Problem

Posted by Chris Brown
on 2007-11-07 10:42:22 UTC
It might be worth trying a powerful magnet on the shank of a small
scewdriver, moving the ball around with the end of the screwdriver
and hopefully it will come out on the end of the screwdriver.

Chris

--- In CAD_CAM_EDM_DRO@yahoogroups.com, wanliker@... wrote:
>
>
> I am in the process of building up a Sherline for CNC, but I have
a problem,
> I want to remove the pulley on the spindle, and it appears that the
set
> screw, has a broken off ball from an Allen ball Head wrench
inside the setscrew.
> So far I have tried picking at it with long sharp dental tools
> Spinning the spindle at high speeds, hoping it would throw itself
out.
> Soaking it in WD-40, and trying to pick, or spin it out.
>
> So far no happiness....
>
> Another Question.............................................
>
> Where or how are Sherline owners putting a pickup to measure
spindle speed
> or position? I have a board with a pickup on it, but wanting to
know
> where/how, you mounted the sensing disc.
>
> Are you adding a disc to the pulley's, or??? Any links with
pictures??
> thank You,
> bill
>
>
>
>
> ************************************** See what's new at
http://www.aol.com
>
>
> [Non-text portions of this message have been removed]
>

Discussion Thread

wanliker@a... 2007-11-07 00:38:08 UTC Sherline Problem Preston Petty 2007-11-07 02:06:25 UTC Re: Sherline Problem Edward Valpey 2007-11-07 05:34:12 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem Peter Reilley 2007-11-07 07:27:48 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem Russ Waters 2007-11-07 08:12:58 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem Drew Rogge 2007-11-07 08:45:48 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem Jon Elson 2007-11-07 10:19:06 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem wanliker@a... 2007-11-07 10:19:20 UTC Sherline Problem Andy Wander 2007-11-07 10:22:13 UTC RE: [CAD_CAM_EDM_DRO] Sherline Problem Jim DuBois 2007-11-07 10:30:10 UTC RE: [CAD_CAM_EDM_DRO] Sherline Problem Chris Brown 2007-11-07 10:42:22 UTC Re: Sherline Problem David G. LeVine 2007-11-07 10:50:39 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem hannu 2007-11-07 10:55:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem wanliker@a... 2007-11-07 13:33:18 UTC Sherline Problem wanliker@a... 2007-11-07 14:48:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem wanliker@a... 2007-11-07 14:56:06 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem jeetendra_g10 2007-11-08 05:54:25 UTC Re: Sherline Problem hannu 2007-11-08 10:03:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem jesse Brennan 2007-11-08 11:29:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem Andy Wander 2007-11-08 11:40:06 UTC RE: [CAD_CAM_EDM_DRO] Re: Sherline Problem David G. LeVine 2007-11-08 18:53:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem