Re: Sherline Problem
Posted by
jeetendra_g10
on 2007-11-08 05:54:25 UTC
i have difficulty understanding your terminology,but if your problem
is that of a screw stuck inside the threaded hole,and has had its head
cut off,usually,mechanics do one of two things;
they weld a piece of metal to the remaining screw and turn the piece
of metal.
personally,i tried drilling a hole and leaning the bit on one
side.This creates a oval hole in the screw,the i punch in a piece of
metal,and turn the metal.
of course,i did that on car wheel bolts,which measure something like
20 mm diameter.
is that of a screw stuck inside the threaded hole,and has had its head
cut off,usually,mechanics do one of two things;
they weld a piece of metal to the remaining screw and turn the piece
of metal.
personally,i tried drilling a hole and leaning the bit on one
side.This creates a oval hole in the screw,the i punch in a piece of
metal,and turn the metal.
of course,i did that on car wheel bolts,which measure something like
20 mm diameter.
Discussion Thread
wanliker@a...
2007-11-07 00:38:08 UTC
Sherline Problem
Preston Petty
2007-11-07 02:06:25 UTC
Re: Sherline Problem
Edward Valpey
2007-11-07 05:34:12 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Problem
Peter Reilley
2007-11-07 07:27:48 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Problem
Russ Waters
2007-11-07 08:12:58 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Problem
Drew Rogge
2007-11-07 08:45:48 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Problem
Jon Elson
2007-11-07 10:19:06 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Problem
wanliker@a...
2007-11-07 10:19:20 UTC
Sherline Problem
Andy Wander
2007-11-07 10:22:13 UTC
RE: [CAD_CAM_EDM_DRO] Sherline Problem
Jim DuBois
2007-11-07 10:30:10 UTC
RE: [CAD_CAM_EDM_DRO] Sherline Problem
Chris Brown
2007-11-07 10:42:22 UTC
Re: Sherline Problem
David G. LeVine
2007-11-07 10:50:39 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Problem
hannu
2007-11-07 10:55:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem
wanliker@a...
2007-11-07 13:33:18 UTC
Sherline Problem
wanliker@a...
2007-11-07 14:48:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem
wanliker@a...
2007-11-07 14:56:06 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Problem
jeetendra_g10
2007-11-08 05:54:25 UTC
Re: Sherline Problem
hannu
2007-11-08 10:03:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem
jesse Brennan
2007-11-08 11:29:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem
Andy Wander
2007-11-08 11:40:06 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sherline Problem
David G. LeVine
2007-11-08 18:53:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem