CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Sherline Problem

on 2007-11-07 10:50:39 UTC
At 03:37 AM 11/7/2007, you wrote:
>I am in the process of building up a Sherline for CNC, but I have a problem,
>I want to remove the pulley on the spindle, and it appears that the set
>screw, has a broken off ball from an Allen ball Head wrench inside
>the setscrew.
>So far I have tried picking at it with long sharp dental tools
>Spinning the spindle at high speeds, hoping it would throw itself out.
>Soaking it in WD-40, and trying to pick, or spin it out.

Silly idea, get a left handed drill between the point-to-point size
of the key and the root diameter of the setscrew.

Dill IN REVERSE until either the screw comes out or the ball stops
progress or the screw is gone. Get a "tap" drill for the set screw,
drill until you reach the shaft then use the dental pick to remove
the spring shaped metal threads. Pull the pulley.

Next time, use anti-seize on the threads, not epoxy glue <GRIN>.


David G. LeVine
Nashua, NH 03060

Discussion Thread

wanliker@a... 2007-11-07 00:38:08 UTC Sherline Problem Preston Petty 2007-11-07 02:06:25 UTC Re: Sherline Problem Edward Valpey 2007-11-07 05:34:12 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem Peter Reilley 2007-11-07 07:27:48 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem Russ Waters 2007-11-07 08:12:58 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem Drew Rogge 2007-11-07 08:45:48 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem Jon Elson 2007-11-07 10:19:06 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem wanliker@a... 2007-11-07 10:19:20 UTC Sherline Problem Andy Wander 2007-11-07 10:22:13 UTC RE: [CAD_CAM_EDM_DRO] Sherline Problem Jim DuBois 2007-11-07 10:30:10 UTC RE: [CAD_CAM_EDM_DRO] Sherline Problem Chris Brown 2007-11-07 10:42:22 UTC Re: Sherline Problem David G. LeVine 2007-11-07 10:50:39 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem hannu 2007-11-07 10:55:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem wanliker@a... 2007-11-07 13:33:18 UTC Sherline Problem wanliker@a... 2007-11-07 14:48:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem wanliker@a... 2007-11-07 14:56:06 UTC Re: [CAD_CAM_EDM_DRO] Sherline Problem jeetendra_g10 2007-11-08 05:54:25 UTC Re: Sherline Problem hannu 2007-11-08 10:03:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem jesse Brennan 2007-11-08 11:29:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem Andy Wander 2007-11-08 11:40:06 UTC RE: [CAD_CAM_EDM_DRO] Re: Sherline Problem David G. LeVine 2007-11-08 18:53:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline Problem