Re: [CAD_CAM_EDM_DRO] Source for used or surplus sealed keyboards?

----- Original Message -----
From: "Jon Anderson" <janders@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Saturday, August 05, 2000 8:05 PM
Subject: Re: [CAD_CAM_EDM_DRO] Source for used or surplus sealed keyboards?


> Darrell,
>
> Saving up for an upgrade to the Artisan card, and an I/O-interface rail
> from Bill Griffin. Since I'm going to be setting it up real nice, and
> happen to be swamped with work right now, I'm not investing much time in
> interfacing anything since it'll be duplication of effort.
> The cycle start and feedhold inputs will be greatly welcomed, as will VS
> spindle through an inverter I just bought, as well as single block
> execution. Just takes time and $$...
> But still need to do something about the keyboard. Chips randomly jam up
> various keys making editing interesting. I'm finding commercial NEMA
> keyboards running around $400+, a bit steep. I'd be happy if I could
> find something for $100 or less.
>
> Thanks,
>
> Jon
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>