Re: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
Posted by
Jon Elson
on 2012-04-22 20:53:11 UTC
opscimc wrote:
a sequence
of moves over and over, when given a start command. Is that what you really
want? Pre-programmed moves with no computer involved?
Or, do you want to move steppers directly under computer control? In that
case, don't use the SS20001, but connect the SS2000D6 drives to a computer
running a program such as Mach3 or LinuxCNC. These programs can
take a toolpath description in "G Code" and send step and direction
signals through the parallel port to a motor drive.
Jon
> Yes, the SS20001 sends pulse sequences to the SS2000D6 which in turn drives the stepper motor. My question is about a PC-based program to generate those sequences and download them to the SS20001.Without knowing the model, I suspect the SS20001 is designed to perform
>
a sequence
of moves over and over, when given a start command. Is that what you really
want? Pre-programmed moves with no computer involved?
Or, do you want to move steppers directly under computer control? In that
case, don't use the SS20001, but connect the SS2000D6 drives to a computer
running a program such as Mach3 or LinuxCNC. These programs can
take a toolpath description in "G Code" and send step and direction
signals through the parallel port to a motor drive.
Jon
Discussion Thread
opscimc
2012-04-20 20:59:05 UTC
Programming Slo-Syn SS20001 with SS2000D6
kirk
2012-04-21 08:36:40 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
opscimc
2012-04-22 07:25:03 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
turbulatordude
2012-04-22 08:02:01 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
opscimc
2012-04-22 08:50:09 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
Jon Elson
2012-04-22 20:53:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
opscimc
2012-04-22 21:26:57 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
Andy Wander
2012-04-22 21:42:29 UTC
RE: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
opscimc
2012-04-22 21:55:41 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
Ron Thompson
2012-04-23 07:35:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
Jon Elson
2012-04-23 08:41:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
Jon Elson
2012-04-23 08:43:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
opscimc
2012-04-23 09:28:02 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
opscimc
2012-04-23 12:20:18 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
David G. LeVine
2012-04-23 14:04:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
Jon Elson
2012-04-23 18:19:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
opscimc
2012-04-23 19:30:16 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
Andy Wander
2012-04-24 06:46:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
Jon Elson
2012-04-24 09:20:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
opscimc
2012-04-24 12:23:55 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6
Andy Wander
2012-04-24 12:52:39 UTC
RE: [CAD_CAM_EDM_DRO] Re: Programming Slo-Syn SS20001 with SS2000D6
alenz@b...
2012-04-24 18:57:47 UTC
Re: Programming Slo-Syn SS20001 with SS2000D6