CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: 3D Printing

Posted by Tony Smith
on 2012-12-18 23:02:55 UTC
> I have one of these from an ebay seller. Mine came with the thermocouple,
> but not all do. There is an error in the specs. It states 400C max, but
when
> you reprogram for the type K thermocouple it will go much higher. IIRC, it
> will go to the limits of the type K thermocouple.
> One other issue, I could not change mine to read out in F. Not a huge
deal,
> but less convenient for those in the US.


I got that exact one from DX, and it's pretty good for the money. It's more
configurable that most of the ones you see. Mine allows you to set the
temperature to F, but changes it back to C. Weird, but not a biggie.

It's a bit of crap-shoot as to what you'll get, at a minimum they all
control an oven, but everything else is a bonus. The manual lists
everything, but that doesn't mean it's there, even on the same model number.
Some do thermistors, K-type to 1400, RS-424, offset compensation, etc. The
DX model has 2 alarms, but the relay for the second one isn't populated.

I want one that does banding (hold temperature between 2 points) for a
laser. Laser tubes like say 20-24C, and so you may need to heat the water
as well as cool it on occasions. Laser tubes are like Goldilocks, they like
it just right. Not an issue with print heads.

DIY temperature control isn't worth the effort these days. I mean:
https://www.sparkfun.com/products/306, sheesh.

Tony

Discussion Thread

dampfloken 2007-05-07 00:15:16 UTC 3D Printing Graham Stabler 2007-05-07 04:25:28 UTC Re: 3D Printing James Cullins 2007-05-07 05:21:09 UTC Re: [CAD_CAM_EDM_DRO] 3D Printing ebiz_59 2012-07-09 21:54:17 UTC 3D Printing Jon Elson 2012-07-10 08:54:51 UTC Re: [CAD_CAM_EDM_DRO] 3D Printing Mars Bonfire 2012-07-11 15:09:01 UTC Re: 3D Printing callcbm Enjen joes 2012-07-11 17:19:02 UTC RE: [CAD_CAM_EDM_DRO] 3D Printing Drew 2012-07-12 06:40:51 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Printing Jack McKie 2012-07-12 07:42:58 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Printing Craig Carmichael 2012-07-12 09:13:12 UTC Re: [CAD_CAM_EDM_DRO] Conductive ABS -- 3D Printing Drew Rogge 2012-07-12 09:47:36 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Printing Drew 2012-07-12 16:39:59 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Printing Gary Crowell 2012-07-12 16:40:15 UTC Re: [CAD_CAM_EDM_DRO] Conductive ABS -- 3D Printing Drew 2012-07-13 10:32:55 UTC Re: [CAD_CAM_EDM_DRO] Conductive ABS -- 3D Printing Craig Carmichael 2012-07-15 11:22:55 UTC Re: [CAD_CAM_EDM_DRO] Conductive ABS -- 3D Printing Mark Bingham 2012-07-24 15:42:57 UTC Re: [CAD_CAM_EDM_DRO] Conductive ABS -- 3D Printing Dan Mauch 2012-12-18 07:56:07 UTC Re: 3D Printing John Dammeyer 2012-12-18 09:09:45 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Printing Dan Mauch 2012-12-18 09:34:14 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Printing John Dammeyer 2012-12-18 09:48:41 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Printing John Dammeyer 2012-12-18 09:48:44 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Printing samcoinc2001 2012-12-18 14:29:36 UTC Re: 3D Printing Tony Smith 2012-12-18 19:34:29 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Printing Ron Thompson 2012-12-18 21:37:42 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Printing Tony Smith 2012-12-18 23:02:55 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Printing Ron Thompson 2012-12-19 07:09:00 UTC Re: [CAD_CAM_EDM_DRO] Re: 3D Printing samcoinc2001 2012-12-19 16:12:23 UTC Re: 3D Printing Tony Smith 2012-12-19 22:12:43 UTC RE: [CAD_CAM_EDM_DRO] Re: 3D Printing