Re: Encoders
Posted by
Jon Elson
on 1999-06-28 23:31:30 UTC
TADGUNINC@... wrote:
function to the index and one of the quadrature channels, and rotate it smoothly.
It doesn't have to be constant speed. It will show the cycles / rev.
With a scope, use the index channel, or rig up a homemade one that gives
one pulse per rev. Attach a motor, and spin at constant speed. use the scope
to time the index period, then time the period of a quadrature channel.
Divide index period by quad period, that should be the cycles/rev.
4 times that would be the quadrature counts / rev.
Jon
> From: TADGUNINC@...If these encoders have an index pulse, you hook a counter with a ratio counting
>
> Another quick question,
> I have several older commercial printers, is there any way to determine
> the number of slots, cpr? I have a scope and a means of powering them up.
function to the index and one of the quadrature channels, and rotate it smoothly.
It doesn't have to be constant speed. It will show the cycles / rev.
With a scope, use the index channel, or rig up a homemade one that gives
one pulse per rev. Attach a motor, and spin at constant speed. use the scope
to time the index period, then time the period of a quadrature channel.
Divide index period by quad period, that should be the cycles/rev.
4 times that would be the quadrature counts / rev.
Jon
Discussion Thread
Jon Elson
1999-06-28 23:31:30 UTC
Re: Encoders
Tim Goldstein
1999-06-29 16:27:22 UTC
Re: Encoders
Jon Elson
1999-06-29 23:25:29 UTC
Re: Encoders
Tim Goldstein
1999-06-30 08:08:50 UTC
Re: Encoders
Dan Mauch
1999-06-30 08:40:01 UTC
Re: Encoders
Jon Elson
1999-06-30 23:04:21 UTC
Re: Encoders
Laverne Karras
1999-07-01 18:26:50 UTC
Re: Encoders
Ron Brown
1999-07-11 07:03:23 UTC
Encoders
Ted Robbins
1999-07-15 10:16:02 UTC
Encoders
William Scalione
2000-06-15 18:40:55 UTC
Encoders
Ian Wright
2001-08-27 05:27:33 UTC
Encoders
Jon Elson
2001-08-27 11:46:07 UTC
Re: [CAD_CAM_EDM_DRO] Encoders
Ian Wright
2001-08-27 12:47:29 UTC
Re: [CAD_CAM_EDM_DRO] Encoders
Alan Marconett KM6VV
2001-08-27 12:51:11 UTC
Re: [CAD_CAM_EDM_DRO] Encoders
Jon Elson
2001-08-27 21:15:03 UTC
Re: [CAD_CAM_EDM_DRO] Encoders
Joseph
2001-08-27 22:47:10 UTC
Re: Encoders
Frank Cohn
2001-10-16 01:46:03 UTC
Encoders
Alan Marconett KM6VV
2001-10-16 10:41:19 UTC
Re: [CAD_CAM_EDM_DRO] Encoders
marble_h
2002-02-02 19:21:24 UTC
Encoders
Lew
2002-02-02 19:29:54 UTC
RE: [CAD_CAM_EDM_DRO] Encoders
marble_h
2002-02-02 19:53:40 UTC
Re: Encoders
Francisco Simon
2002-10-11 02:56:36 UTC
Encoders
dakota8833
2002-10-11 06:43:24 UTC
Re: Encoders
marc_e_davis
2002-11-20 11:23:29 UTC
Encoders
deanc500
2002-11-20 11:55:35 UTC
Re: Encoders
Tim Goldstein
2002-11-20 12:44:25 UTC
Re: [CAD_CAM_EDM_DRO] Encoders
Bob Simon
2002-11-20 16:52:46 UTC
Re: [CAD_CAM_EDM_DRO] Encoders
Jon Elson
2002-11-20 21:26:39 UTC
Re: [CAD_CAM_EDM_DRO] Encoders
Tim Goldstein
2003-12-24 21:45:45 UTC
Re:Re: Encoders
Tony Jeffree
2003-12-25 00:02:39 UTC
Re: [CAD_CAM_EDM_DRO] Re:Re: Encoders
Tim Goldstein
2003-12-25 09:02:30 UTC
RE: [CAD_CAM_EDM_DRO] Encoders
Jon Elson
2003-12-25 11:21:06 UTC
Re: [CAD_CAM_EDM_DRO] Re:Re: Encoders
Gregory Kamysz
2003-12-25 13:57:57 UTC
Re: [CAD_CAM_EDM_DRO] Re:Re: Encoders
Tony Jeffree
2003-12-25 15:20:36 UTC
RE: [CAD_CAM_EDM_DRO] Encoders
Bruce Pigeon
2005-02-15 09:07:58 UTC
Encoders
Ron Kline
2005-02-15 18:01:48 UTC
Caps ??
Dave Fisher
2005-02-15 18:19:20 UTC
RE: [CAD_CAM_EDM_DRO] Caps ??
R Rogers
2005-02-15 18:19:59 UTC
Re: [CAD_CAM_EDM_DRO] Caps ??
JanRwl@A...
2005-02-16 16:41:40 UTC
Re: [CAD_CAM_EDM_DRO] Caps ??
Robert Campbell
2005-02-16 16:48:34 UTC
Re: [CAD_CAM_EDM_DRO] Caps ??
JanRwl@A...
2005-02-16 22:40:17 UTC
Re: [CAD_CAM_EDM_DRO] Caps ??
pwshahood
2005-02-17 10:45:30 UTC
Re: Caps ??