CAD CAM EDM DRO - Yahoo Group Archive

Re: Encoders

Posted by Jon Elson
on 1999-06-30 23:04:21 UTC
Tim Goldstein wrote:

> From: "Tim Goldstein" <timg@...>
>
> Jon,
>
> Looking into these encoders they are HEDS9100 A00 set up with 1000 slot
> wheels.
> Does your endorsement for servo use still apply?

Sure, these should drive the inputs to the Servo-to-Go card just fine, and the
resolution (if they are directly coupled to a .2" lead screw) will be fine.
The only thing you might want to consider is going for an encoder with
the index pulse, as that will make a home switch extremely reproducible.

Jon

Discussion Thread

Jon Elson 1999-06-28 23:31:30 UTC Re: Encoders Tim Goldstein 1999-06-29 16:27:22 UTC Re: Encoders Jon Elson 1999-06-29 23:25:29 UTC Re: Encoders Tim Goldstein 1999-06-30 08:08:50 UTC Re: Encoders Dan Mauch 1999-06-30 08:40:01 UTC Re: Encoders Jon Elson 1999-06-30 23:04:21 UTC Re: Encoders Laverne Karras 1999-07-01 18:26:50 UTC Re: Encoders Ron Brown 1999-07-11 07:03:23 UTC Encoders Ted Robbins 1999-07-15 10:16:02 UTC Encoders William Scalione 2000-06-15 18:40:55 UTC Encoders Ian Wright 2001-08-27 05:27:33 UTC Encoders Jon Elson 2001-08-27 11:46:07 UTC Re: [CAD_CAM_EDM_DRO] Encoders Ian Wright 2001-08-27 12:47:29 UTC Re: [CAD_CAM_EDM_DRO] Encoders Alan Marconett KM6VV 2001-08-27 12:51:11 UTC Re: [CAD_CAM_EDM_DRO] Encoders Jon Elson 2001-08-27 21:15:03 UTC Re: [CAD_CAM_EDM_DRO] Encoders Joseph 2001-08-27 22:47:10 UTC Re: Encoders Frank Cohn 2001-10-16 01:46:03 UTC Encoders Alan Marconett KM6VV 2001-10-16 10:41:19 UTC Re: [CAD_CAM_EDM_DRO] Encoders marble_h 2002-02-02 19:21:24 UTC Encoders Lew 2002-02-02 19:29:54 UTC RE: [CAD_CAM_EDM_DRO] Encoders marble_h 2002-02-02 19:53:40 UTC Re: Encoders Francisco Simon 2002-10-11 02:56:36 UTC Encoders dakota8833 2002-10-11 06:43:24 UTC Re: Encoders marc_e_davis 2002-11-20 11:23:29 UTC Encoders deanc500 2002-11-20 11:55:35 UTC Re: Encoders Tim Goldstein 2002-11-20 12:44:25 UTC Re: [CAD_CAM_EDM_DRO] Encoders Bob Simon 2002-11-20 16:52:46 UTC Re: [CAD_CAM_EDM_DRO] Encoders Jon Elson 2002-11-20 21:26:39 UTC Re: [CAD_CAM_EDM_DRO] Encoders Tim Goldstein 2003-12-24 21:45:45 UTC Re:Re: Encoders Tony Jeffree 2003-12-25 00:02:39 UTC Re: [CAD_CAM_EDM_DRO] Re:Re: Encoders Tim Goldstein 2003-12-25 09:02:30 UTC RE: [CAD_CAM_EDM_DRO] Encoders Jon Elson 2003-12-25 11:21:06 UTC Re: [CAD_CAM_EDM_DRO] Re:Re: Encoders Gregory Kamysz 2003-12-25 13:57:57 UTC Re: [CAD_CAM_EDM_DRO] Re:Re: Encoders Tony Jeffree 2003-12-25 15:20:36 UTC RE: [CAD_CAM_EDM_DRO] Encoders Bruce Pigeon 2005-02-15 09:07:58 UTC Encoders Ron Kline 2005-02-15 18:01:48 UTC Caps ?? Dave Fisher 2005-02-15 18:19:20 UTC RE: [CAD_CAM_EDM_DRO] Caps ?? R Rogers 2005-02-15 18:19:59 UTC Re: [CAD_CAM_EDM_DRO] Caps ?? JanRwl@A... 2005-02-16 16:41:40 UTC Re: [CAD_CAM_EDM_DRO] Caps ?? Robert Campbell 2005-02-16 16:48:34 UTC Re: [CAD_CAM_EDM_DRO] Caps ?? JanRwl@A... 2005-02-16 22:40:17 UTC Re: [CAD_CAM_EDM_DRO] Caps ?? pwshahood 2005-02-17 10:45:30 UTC Re: Caps ??