CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion

Posted by Smoke
on 2000-11-27 23:58:43 UTC
If you look closly at the photo, you'll see what appears to be a motor
sticking out from the bottom of the vertical screw housing near the base of
the machine. With an even closer look, it appears there is something
sticking out from both sides of this housing. So I think they may have put
in a custom housing, drive the ball screw from the bottom and eliminated the
spiral bevel gears on top.

This is all a guess from what I can see in the photo...but is SOUNDS
reasonable.

Smoke
-----Original Message-----
From: Wally K <cnc4me@...>
To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
Date: Monday, November 27, 2000 5:47 PM
Subject: [CAD_CAM_EDM_DRO] Re: Z axis conversion


>Smoke, do you remember anything on how the motor drove the knee up
>and down. I can not make anything out from the picture.
>
>Wally K.
>

Discussion Thread

Joe Vicars 2000-02-16 07:58:39 UTC Z axis conversion Charles Hopkins 2000-02-16 10:43:27 UTC RE: Z axis conversion Jon Elson 2000-02-16 21:05:59 UTC Re: Z axis conversion F. de Beer 2000-02-17 11:13:00 UTC Re: Z axis conversion SMITH, THOMAS B. (JSC-DX) 2000-02-17 12:16:40 UTC RE: Z axis conversion Drew Rogge 2000-02-17 13:05:18 UTC Re: RE: Z axis conversion stratton@m... 2000-02-17 16:16:20 UTC Re: Z axis conversion Jon Elson 2000-02-17 21:42:10 UTC Re: RE: Z axis conversion Jon Elson 2000-02-17 21:59:57 UTC Re: Z axis conversion SMITH, THOMAS B. (JSC-DX) 2000-02-18 07:52:51 UTC RE:Z axis conversion Jon Elson 2000-11-27 12:03:54 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Smoke 2000-11-27 12:32:49 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Wally K 2000-11-27 12:43:23 UTC Re: Z axis conversion Wally K 2000-11-27 12:53:04 UTC Re: Z axis conversion Smoke 2000-11-27 13:16:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion James Owens 2000-11-27 13:17:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Wally K 2000-11-27 13:25:48 UTC Re: Z axis conversion Wally K 2000-11-27 13:31:02 UTC Re: Z axis conversion Joe Vicars 2000-11-27 13:44:59 UTC Z axis conversion Wally K 2000-11-27 13:58:05 UTC Re: Z axis conversion Joe Vicars 2000-11-27 14:01:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion dave engvall 2000-11-27 14:26:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Andy Anderson 2000-11-27 14:40:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Wally K 2000-11-27 14:46:29 UTC Re: Z axis conversion Smoke 2000-11-27 15:08:08 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Smoke 2000-11-27 15:10:15 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Smoke 2000-11-27 15:14:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Wally K 2000-11-27 15:22:25 UTC Re: Z axis conversion diazden 2000-11-27 15:41:35 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Smoke 2000-11-27 15:55:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 16:16:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 16:20:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 16:23:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 16:26:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Wally K 2000-11-27 16:47:38 UTC Re: Z axis conversion dave engvall 2000-11-27 21:12:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion dave engvall 2000-11-27 21:25:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 23:03:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Smoke 2000-11-27 23:58:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Smoke 2000-11-28 00:06:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion diazden 2000-11-28 05:51:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion