CAD CAM EDM DRO - Yahoo Group Archive

Re: Z axis conversion

Posted by Wally K
on 2000-11-27 12:53:04 UTC
Smokie, If you know were that site was that used the knee for the Z
axis it would be very helpfull if you posted it. I think that it is
worth exploring.


Wally K.



Smoke wrote:
> I've been visiting a lot of CNC machine sites, looking for a good
one. I
> ran across one that always powers the knee and they claim many
thousands of
> hours of service with no problems. You might want to consider here
that you
> probably won't need an anti backlash nut due to the weight of the
knee,
> saddle, and work pushing down on it.
>
> Smoke



>Wally K. wrote;
> >if i could come up with a good solution. And i still wonder if
> >moving the knee is a good idea or not, in terms of wear. And or
> >replacing the acme knee screw with a ball screw.
> >
> >
> >Wally K.

Discussion Thread

Joe Vicars 2000-02-16 07:58:39 UTC Z axis conversion Charles Hopkins 2000-02-16 10:43:27 UTC RE: Z axis conversion Jon Elson 2000-02-16 21:05:59 UTC Re: Z axis conversion F. de Beer 2000-02-17 11:13:00 UTC Re: Z axis conversion SMITH, THOMAS B. (JSC-DX) 2000-02-17 12:16:40 UTC RE: Z axis conversion Drew Rogge 2000-02-17 13:05:18 UTC Re: RE: Z axis conversion stratton@m... 2000-02-17 16:16:20 UTC Re: Z axis conversion Jon Elson 2000-02-17 21:42:10 UTC Re: RE: Z axis conversion Jon Elson 2000-02-17 21:59:57 UTC Re: Z axis conversion SMITH, THOMAS B. (JSC-DX) 2000-02-18 07:52:51 UTC RE:Z axis conversion Jon Elson 2000-11-27 12:03:54 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Smoke 2000-11-27 12:32:49 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Wally K 2000-11-27 12:43:23 UTC Re: Z axis conversion Wally K 2000-11-27 12:53:04 UTC Re: Z axis conversion Smoke 2000-11-27 13:16:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion James Owens 2000-11-27 13:17:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Wally K 2000-11-27 13:25:48 UTC Re: Z axis conversion Wally K 2000-11-27 13:31:02 UTC Re: Z axis conversion Joe Vicars 2000-11-27 13:44:59 UTC Z axis conversion Wally K 2000-11-27 13:58:05 UTC Re: Z axis conversion Joe Vicars 2000-11-27 14:01:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion dave engvall 2000-11-27 14:26:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Andy Anderson 2000-11-27 14:40:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Wally K 2000-11-27 14:46:29 UTC Re: Z axis conversion Smoke 2000-11-27 15:08:08 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Smoke 2000-11-27 15:10:15 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Smoke 2000-11-27 15:14:45 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Wally K 2000-11-27 15:22:25 UTC Re: Z axis conversion diazden 2000-11-27 15:41:35 UTC Re: [CAD_CAM_EDM_DRO] Z axis conversion Smoke 2000-11-27 15:55:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 16:16:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 16:20:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 16:23:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 16:26:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Wally K 2000-11-27 16:47:38 UTC Re: Z axis conversion dave engvall 2000-11-27 21:12:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion dave engvall 2000-11-27 21:25:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Jon Elson 2000-11-27 23:03:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Smoke 2000-11-27 23:58:43 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion Smoke 2000-11-28 00:06:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion diazden 2000-11-28 05:51:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion