Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Posted by
Andy Anderson
on 2000-11-27 14:40:10 UTC
Here's one CNC retrofitter that controls the knee. See the "We drive the knee" link towards the bottom of the page.
http://www.cncauto.com/System-M3X-3-axis-cnc-retrofit.htm
http://www.cncauto.com/System-M3X-3-axis-cnc-retrofit.htm
> >Smokie, If you know were that site was that used the knee for the Z
> >axis it would be very helpfull if you posted it. I think that it is
> >worth exploring.
> >
> >
> >Wally K.
Discussion Thread
Joe Vicars
2000-02-16 07:58:39 UTC
Z axis conversion
Charles Hopkins
2000-02-16 10:43:27 UTC
RE: Z axis conversion
Jon Elson
2000-02-16 21:05:59 UTC
Re: Z axis conversion
F. de Beer
2000-02-17 11:13:00 UTC
Re: Z axis conversion
SMITH, THOMAS B. (JSC-DX)
2000-02-17 12:16:40 UTC
RE: Z axis conversion
Drew Rogge
2000-02-17 13:05:18 UTC
Re: RE: Z axis conversion
stratton@m...
2000-02-17 16:16:20 UTC
Re: Z axis conversion
Jon Elson
2000-02-17 21:42:10 UTC
Re: RE: Z axis conversion
Jon Elson
2000-02-17 21:59:57 UTC
Re: Z axis conversion
SMITH, THOMAS B. (JSC-DX)
2000-02-18 07:52:51 UTC
RE:Z axis conversion
Jon Elson
2000-11-27 12:03:54 UTC
Re: [CAD_CAM_EDM_DRO] Z axis conversion
Smoke
2000-11-27 12:32:49 UTC
Re: [CAD_CAM_EDM_DRO] Z axis conversion
Wally K
2000-11-27 12:43:23 UTC
Re: Z axis conversion
Wally K
2000-11-27 12:53:04 UTC
Re: Z axis conversion
Smoke
2000-11-27 13:16:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
James Owens
2000-11-27 13:17:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Wally K
2000-11-27 13:25:48 UTC
Re: Z axis conversion
Wally K
2000-11-27 13:31:02 UTC
Re: Z axis conversion
Joe Vicars
2000-11-27 13:44:59 UTC
Z axis conversion
Wally K
2000-11-27 13:58:05 UTC
Re: Z axis conversion
Joe Vicars
2000-11-27 14:01:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
dave engvall
2000-11-27 14:26:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Andy Anderson
2000-11-27 14:40:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Wally K
2000-11-27 14:46:29 UTC
Re: Z axis conversion
Smoke
2000-11-27 15:08:08 UTC
Re: [CAD_CAM_EDM_DRO] Z axis conversion
Smoke
2000-11-27 15:10:15 UTC
Re: [CAD_CAM_EDM_DRO] Z axis conversion
Smoke
2000-11-27 15:14:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Wally K
2000-11-27 15:22:25 UTC
Re: Z axis conversion
diazden
2000-11-27 15:41:35 UTC
Re: [CAD_CAM_EDM_DRO] Z axis conversion
Smoke
2000-11-27 15:55:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Jon Elson
2000-11-27 16:16:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Jon Elson
2000-11-27 16:20:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Jon Elson
2000-11-27 16:23:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Jon Elson
2000-11-27 16:26:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Wally K
2000-11-27 16:47:38 UTC
Re: Z axis conversion
dave engvall
2000-11-27 21:12:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
dave engvall
2000-11-27 21:25:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Jon Elson
2000-11-27 23:03:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Smoke
2000-11-27 23:58:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
Smoke
2000-11-28 00:06:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion
diazden
2000-11-28 05:51:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z axis conversion