Re: Scanner/Digitizer
Posted by
John D. Guenther
on 2001-01-02 12:26:03 UTC
Tom,
Strictly IC magazine just published a two part article on this subject
complete with drawings for the digitizer frame. This was in the
October/November and December/ January 2000/2001 issues. This is a
large, 6 foot by 8 foot, digitizer which uses the MaxNC software and
the MaxNC digitizing probe. Of course this could be scaled up or down
depending on your needs. The guy who designed it is digitizing a
complete Model T Ford engine to reproduce it in miniature. The
project was rather simple, just large, an looks like it would work
rather well for large items.
John Guenther
Strictly IC magazine just published a two part article on this subject
complete with drawings for the digitizer frame. This was in the
October/November and December/ January 2000/2001 issues. This is a
large, 6 foot by 8 foot, digitizer which uses the MaxNC software and
the MaxNC digitizing probe. Of course this could be scaled up or down
depending on your needs. The guy who designed it is digitizing a
complete Model T Ford engine to reproduce it in miniature. The
project was rather simple, just large, an looks like it would work
rather well for large items.
John Guenther
--- In CAD_CAM_EDM_DRO@egroups.com, "Tom" <tcsibor@v...> wrote:
> Has anyone built or have plans for building a 3D digitizer? What
hardware
> and software did you use. Would it be realistic to build a 3 axis
stepper
> system and use DRO software to capture the information?
>
>
> Tom Csibor.
> tcsibor@v...
>
>
>
> [Non-text portions of this message have been removed]
Discussion Thread
Tom
2001-01-02 12:08:47 UTC
Scanner/Digitizer
John D. Guenther
2001-01-02 12:26:03 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 12:28:15 UTC
Re: [CAD_CAM_EDM_DRO] Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 12:30:40 UTC
Re: Scanner/Digitizer
John D. Guenther
2001-01-02 12:48:58 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 13:23:39 UTC
Re: Scanner/Digitizer
Tom Csibor
2001-01-02 13:55:05 UTC
Re: Scanner/Digitizer
Smoke
2001-01-02 13:59:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 14:34:01 UTC
Re: Scanner/Digitizer
Tom Csibor
2001-01-02 15:34:53 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 15:59:32 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 23:24:10 UTC
Re: Scanner/Digitizer
Tony Jeffree
2001-01-03 00:23:38 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-03 11:09:29 UTC
Re: Scanner/Digitizer
Tony Jeffree
2001-01-03 14:30:41 UTC
Re: Scanner/Digitizer
ballendo@y...
2001-01-03 19:22:25 UTC
Re: Scanner/Digitizer
ballendo@y...
2001-01-03 19:34:03 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-03 20:18:29 UTC
Re: Scanner/Digitizer
Smoke
2001-01-03 20:55:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Scanner/Digitizer