Re: Scanner/Digitizer
Posted by
Tony Jeffree
on 2001-01-03 00:23:38 UTC
At 07:24 03/01/01 +0000, you wrote:
spindle/collets are actually manufactured by Taig. So the digitizer will
fit Taig mills also.
Regards,
Tony
>See http://www.positiveflow.com/maxacc.htm, Dearmond Tool. DigitizerInteresting...confirms what I had previously suspected, that the MaxNC
>fits into MaxNC spindle. Don't know size... yet.
spindle/collets are actually manufactured by Taig. So the digitizer will
fit Taig mills also.
Regards,
Tony
Discussion Thread
Tom
2001-01-02 12:08:47 UTC
Scanner/Digitizer
John D. Guenther
2001-01-02 12:26:03 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 12:28:15 UTC
Re: [CAD_CAM_EDM_DRO] Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 12:30:40 UTC
Re: Scanner/Digitizer
John D. Guenther
2001-01-02 12:48:58 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 13:23:39 UTC
Re: Scanner/Digitizer
Tom Csibor
2001-01-02 13:55:05 UTC
Re: Scanner/Digitizer
Smoke
2001-01-02 13:59:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 14:34:01 UTC
Re: Scanner/Digitizer
Tom Csibor
2001-01-02 15:34:53 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 15:59:32 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-02 23:24:10 UTC
Re: Scanner/Digitizer
Tony Jeffree
2001-01-03 00:23:38 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-03 11:09:29 UTC
Re: Scanner/Digitizer
Tony Jeffree
2001-01-03 14:30:41 UTC
Re: Scanner/Digitizer
ballendo@y...
2001-01-03 19:22:25 UTC
Re: Scanner/Digitizer
ballendo@y...
2001-01-03 19:34:03 UTC
Re: Scanner/Digitizer
Alan Marconett KM6VV
2001-01-03 20:18:29 UTC
Re: Scanner/Digitizer
Smoke
2001-01-03 20:55:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Scanner/Digitizer