CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill

Posted by Jon Elson
on 2001-03-26 21:41:15 UTC
Tim Goldstein wrote:

> Seems like we are comparing apples and oranges here. A Sherline is a tiny
> machine and same with a Taig. A 3/8" mill is a big bit for these machines
> and taking a .100" depth of cut is a lot (don't think I ever cut that much
> in one pass when I had the Sherline). 25 lbs of cutting force would be a
> huge amount for one of these machines and would almost definitely deflect
> the vertical column significantly. If I remember the lead screws are only
> 1/4-20. How much force do you think they would take before deflecting when
> you consider that you can have about 10" unsupported on the X axis if moved
> all the way to the positive end?

OK, if the leadscrew is 1/4-20 rod, then you really have to be careful about
putting the leadscrew in compression - it would buckle! I consider it
pushing things to cut .062" depth at full width in aluminum with a 3/8"
cutter. Sometimes on my Bridgeport I do heavier stuff, though.
My only knowledge of the Sherline and Taig are from pictures in
magazines.

Jon

Discussion Thread

lasernerd@h... 2001-03-25 10:54:40 UTC Gecko + Servos + Taig Mill Tim Goldstein 2001-03-25 11:15:45 UTC RE: [CAD_CAM_EDM_DRO] Gecko + Servos + Taig Mill lasernerd@h... 2001-03-25 14:30:38 UTC Re: Gecko + Servos + Taig Mill Peter Chen 2001-03-25 18:23:50 UTC Gecko + Servos + Taig Mill mariss92705@y... 2001-03-25 18:34:29 UTC Re: Gecko + Servos + Taig Mill lasernerd@h... 2001-03-25 19:36:13 UTC Re: Gecko + Servos + Taig Mill Tim Goldstein 2001-03-25 19:52:44 UTC RE: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill lasernerd@h... 2001-03-25 19:59:11 UTC Re: Gecko + Servos + Taig Mill lasernerd@h... 2001-03-25 20:08:51 UTC Re: Gecko + Servos + Taig Mill Jon Elson 2001-03-25 22:31:37 UTC Re: [CAD_CAM_EDM_DRO] Gecko + Servos + Taig Mill Jon Elson 2001-03-25 22:40:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Jon Elson 2001-03-25 22:52:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Jon Elson 2001-03-25 23:00:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill cadman@p... 2001-03-25 23:15:19 UTC Re: Gecko + Servos + Taig Mill Tony Jeffree 2001-03-25 23:54:50 UTC Re: Gecko + Servos + Taig Mill dkowalcz@i... 2001-03-26 05:09:51 UTC Re: Gecko + Servos + Taig Mill Dan Mauch 2001-03-26 06:45:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Dan Mauch 2001-03-26 07:17:37 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Jeff Demand 2001-03-26 08:36:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Tom Eldredge 2001-03-26 11:02:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Tim Goldstein 2001-03-26 11:18:40 UTC RE: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Jon Elson 2001-03-26 13:21:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Tim Goldstein 2001-03-26 13:36:14 UTC RE: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Jon Elson 2001-03-26 13:43:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill lasernerd@h... 2001-03-26 16:18:10 UTC Re: Gecko + Servos + Taig Mill Jon Elson 2001-03-26 21:41:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Tim Goldstein 2001-03-26 21:55:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Jon Elson 2001-03-26 22:17:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Tony Jeffree 2001-03-27 00:26:04 UTC Re: Gecko + Servos + Taig Mill Dan Mauch 2001-03-27 05:18:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill Nicholas Carter and Felice Luftschein 2001-03-27 08:52:47 UTC Re: Gecko + Servos + Taig Mill Jon Elson 2001-03-27 13:37:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Gecko + Servos + Taig Mill