Re: [CAD_CAM_EDM_DRO] Thread milling
Posted by
Marcus
on 2001-03-29 16:12:17 UTC
Hi Drew:
My machine has a dedicated helical interpolation G code for right hand
helices (G12) and left hand helices (G13).
I think the Okuma control just needs a G02 or a G03 with a Z level change in
the same line to do a single helical turn.
I'm not sure about this but I think it needs a counter in the program to
generate multiple turns.
Other controls I have no idea.
Cheers
Marcus
My machine has a dedicated helical interpolation G code for right hand
helices (G12) and left hand helices (G13).
I think the Okuma control just needs a G02 or a G03 with a Z level change in
the same line to do a single helical turn.
I'm not sure about this but I think it needs a counter in the program to
generate multiple turns.
Other controls I have no idea.
Cheers
Marcus
----- Original Message -----
From: Drew Rogge <drew@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, March 29, 2001 12:54 PM
Subject: [CAD_CAM_EDM_DRO] Thread milling
> There was a discussion a while ago about thread milling but after
> talking my cousin into trying it on his CNC machine I realized
> that I don't know if there's a straight forward way of doing it.
> I first thought that all there was to it was to do a couple of
> circular interpolations in XY while ramping down in the Z. Now
> I'm wondering how one programs the arcs with G02/3 while ramping
> the Z with a G01. Is there an easy way to do this or do you have
> to approximate the arcs with a bunch of short lines?
>
> Thanks,
> Drew
>
> --
> Drew Rogge
Discussion Thread
Drew Rogge
2001-03-29 12:54:19 UTC
Thread milling
Jon Elson
2001-03-29 16:01:09 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
Jon Elson
2001-03-29 16:05:03 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
Marcus
2001-03-29 16:12:17 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
Smoke
2001-03-29 16:51:32 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
Drew Rogge
2001-03-30 08:36:55 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
beer@s...
2001-03-30 12:49:28 UTC
Re: Thread milling
Jeff Jones
2004-12-09 09:20:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
metlmunchr
2004-12-09 11:19:35 UTC
Re: Thread milling
Andy Wander
2004-12-09 11:40:24 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thread milling
Jeff Jones
2004-12-09 12:19:43 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thread milling
Graham Stabler
2004-12-09 12:30:38 UTC
Re: Thread milling
Jon Anderson
2004-12-09 12:49:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
V FONG
2004-12-09 12:59:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jeff Jones
2004-12-09 13:00:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Tom Hubin
2004-12-09 13:10:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jeff Jones
2004-12-09 13:37:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Peter Renolds
2004-12-09 16:22:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
R Rogers
2004-12-09 16:53:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jon Anderson
2004-12-09 18:11:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Andy Wander
2004-12-09 18:26:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thread milling
Stephen Wille Padnos
2004-12-09 18:35:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Robert Lyman
2004-12-09 19:49:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
cnc002@a...
2004-12-09 19:56:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
R Rogers
2004-12-09 21:35:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
R Rogers
2004-12-09 22:04:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jon Anderson
2004-12-09 23:03:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jeff Jones
2004-12-09 23:06:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Torsten
2004-12-10 05:16:11 UTC
Re: Thread milling
Graham Stabler
2004-12-10 05:17:07 UTC
Re: Thread milling - collets etc off topic
John Meissner
2004-12-10 06:09:54 UTC
Re: Thread milling - collets etc off topic
Wayne
2004-12-10 06:56:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling - collets etc off topic
R Rogers
2004-12-10 07:24:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
metlmunchr
2004-12-11 10:09:41 UTC
Re: Thread milling, and yeah, I know it's OT
wanliker@a...
2004-12-11 13:11:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling, and yeah, I know it's OT