Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Posted by
Jeff Jones
on 2004-12-09 23:06:53 UTC
just the industry practice. Taps don't belong in a spindle. Thats why
they dont fit. They belong in tap handles and tapping heads...where
they were designed to be used.
Perhaps using collets on as-is taps is a bad idea. But, hey,
while you're grinding one end...? Why not grind a teensy bit
off the other to make it fit correctly in the collet?
Jeff
they dont fit. They belong in tap handles and tapping heads...where
they were designed to be used.
> RonYou are, no doubt, correct. But as an experiment on the cheap?
Perhaps using collets on as-is taps is a bad idea. But, hey,
while you're grinding one end...? Why not grind a teensy bit
off the other to make it fit correctly in the collet?
Jeff
Discussion Thread
Drew Rogge
2001-03-29 12:54:19 UTC
Thread milling
Jon Elson
2001-03-29 16:01:09 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
Jon Elson
2001-03-29 16:05:03 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
Marcus
2001-03-29 16:12:17 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
Smoke
2001-03-29 16:51:32 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
Drew Rogge
2001-03-30 08:36:55 UTC
Re: [CAD_CAM_EDM_DRO] Thread milling
beer@s...
2001-03-30 12:49:28 UTC
Re: Thread milling
Jeff Jones
2004-12-09 09:20:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
metlmunchr
2004-12-09 11:19:35 UTC
Re: Thread milling
Andy Wander
2004-12-09 11:40:24 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thread milling
Jeff Jones
2004-12-09 12:19:43 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thread milling
Graham Stabler
2004-12-09 12:30:38 UTC
Re: Thread milling
Jon Anderson
2004-12-09 12:49:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
V FONG
2004-12-09 12:59:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jeff Jones
2004-12-09 13:00:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Tom Hubin
2004-12-09 13:10:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jeff Jones
2004-12-09 13:37:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Peter Renolds
2004-12-09 16:22:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
R Rogers
2004-12-09 16:53:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jon Anderson
2004-12-09 18:11:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Andy Wander
2004-12-09 18:26:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thread milling
Stephen Wille Padnos
2004-12-09 18:35:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Robert Lyman
2004-12-09 19:49:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
cnc002@a...
2004-12-09 19:56:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
R Rogers
2004-12-09 21:35:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
R Rogers
2004-12-09 22:04:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jon Anderson
2004-12-09 23:03:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Jeff Jones
2004-12-09 23:06:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
Torsten
2004-12-10 05:16:11 UTC
Re: Thread milling
Graham Stabler
2004-12-10 05:17:07 UTC
Re: Thread milling - collets etc off topic
John Meissner
2004-12-10 06:09:54 UTC
Re: Thread milling - collets etc off topic
Wayne
2004-12-10 06:56:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling - collets etc off topic
R Rogers
2004-12-10 07:24:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling
metlmunchr
2004-12-11 10:09:41 UTC
Re: Thread milling, and yeah, I know it's OT
wanliker@a...
2004-12-11 13:11:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thread milling, and yeah, I know it's OT