Re: [CAD_CAM_EDM_DRO] Re: Thread milling

Andy Wander wrote:

>[snip]
>
>Of course, the common R8 collets I have seen are only available in 1/32
>increments, so maybe it would be a good idea to get an "emergency" collet
>and drill/ream to whatever size you needed. This would still be less
>expensive than some of the prices I have seen in this discussion for the
>thread milling tools.
>
>Andy Wander
>Verrex Corporation
>
>

Or, you could get an R8 drill chuck, which is handy in numerous
situations. (unless 0.002 or so is too much runout)

- Steve