Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
Posted by
Chris Paine
on 2001-04-28 16:43:23 UTC
There is a publication called machinery mart which might help, I have never
seen it in a shop, it may be something you have to subscribe or specialy
order ( I have seen it arrive in the post at work) If you can get it you
should be able to get a more local deal. The hydraulic bridgeport machines I
have seen (moog hydrapoint) are a bit noisy, chuck out lots of heat ( must
put the electricity bill up a lot) and tended to be temperamental. also
would need 3 phase power which might be a problem.
Chris Paine
West Sussex
UK
collets. 220V on 3 phase (We have 220v here anyway, need to get a 3 phase
transformer though). I'm willing to pay $2000 or so for the mill which is no
where near what they're asking for it right now ($900).
questions, anwser as many of them as you feel comfortable doing and if you
need to know anything else please tell me.
seen it in a shop, it may be something you have to subscribe or specialy
order ( I have seen it arrive in the post at work) If you can get it you
should be able to get a more local deal. The hydraulic bridgeport machines I
have seen (moog hydrapoint) are a bit noisy, chuck out lots of heat ( must
put the electricity bill up a lot) and tended to be temperamental. also
would need 3 phase power which might be a problem.
Chris Paine
West Sussex
UK
>table. Tru-Trace 3D hydraulic controller. Stylii and hold down set. No mill
> Bridgeport dublicating mill with two J style heads, dublicating probe and
collets. 220V on 3 phase (We have 220v here anyway, need to get a 3 phase
transformer though). I'm willing to pay $2000 or so for the mill which is no
where near what they're asking for it right now ($900).
>am I going to save anything buying it for under $2000? Sorry for all the
> Am I rambling on and dreaming here or is there a possibilty for CNC, and
questions, anwser as many of them as you feel comfortable doing and if you
need to know anything else please tell me.
>discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> Every answer is _very_ much appreciated...
> John (UK)
>
>
> [Non-text portions of this message have been removed]
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
e.heritage@b...
2001-04-27 10:25:26 UTC
Bridgeport Tracer?
Tim Goldstein
2001-04-27 11:26:14 UTC
RE: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
Smoke
2001-04-27 12:36:35 UTC
Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
e.heritage@b...
2001-04-27 13:41:34 UTC
Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
e.heritage@b...
2001-04-27 14:28:06 UTC
Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
Smoke
2001-04-27 16:39:32 UTC
Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
dougrasmussen@c...
2001-04-27 17:48:45 UTC
Re: Bridgeport Tracer?
jvicars@c...
2001-04-27 20:57:14 UTC
Re: Bridgeport Tracer?
Sven Peter, TAD S.A.
2001-04-27 21:13:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Tracer?
Sven Peter, TAD S.A.
2001-04-27 21:49:13 UTC
Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
Tim Goldstein
2001-04-27 22:14:00 UTC
Yeager Automation ACE Converter
Smoke
2001-04-28 14:55:50 UTC
Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
Chris Paine
2001-04-28 16:43:23 UTC
Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
Jon Elson
2001-05-01 00:36:35 UTC
Re: [CAD_CAM_EDM_DRO] Bridgeport Tracer?
dougrasmussen@c...
2001-05-02 01:04:20 UTC
Re: Bridgeport Tracer?
stratton@m...
2001-05-02 08:32:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Tracer?
ballendo@y...
2001-05-02 18:32:13 UTC
Re: Bridgeport Tracer?