Re: G320s, New and Improved!
Posted by
mariss92705@y...
on 2001-09-07 19:06:31 UTC
Drew,
Good evening! The base drive is a G320 and the new ones are shipping
as of now. The problem with the multiplier board (G901) has been
identified and fixed as well.
Mariss
Good evening! The base drive is a G320 and the new ones are shipping
as of now. The problem with the multiplier board (G901) has been
identified and fixed as well.
Mariss
--- In CAD_CAM_EDM_DRO@y..., Drew Rogge <drew@p...> wrote:
> Mariss,
>
> When will these changes be made available on the G340? Or are G340's
> just a G320 with a multiplier board in them?
>
> Drew
>
> mariss92705@y... wrote:
> >
> > I have run off the first batch of much improved G320 drives. They
> > will be beta tested Tim and a few others who have graciously
accepted
> > to do so. If no problems present themselves then they will
supplant
> > the existing version in the future. Same price and completely
> > backwards compatible with the old version.
> >
>
> --
> Drew Rogge
> drew@p...
Discussion Thread
mariss92705@y...
2001-09-05 22:26:01 UTC
G320s, New and Improved!
Jon Elson
2001-09-06 10:35:58 UTC
Re: [CAD_CAM_EDM_DRO] G320s, New and Improved!
machines@n...
2001-09-06 13:58:17 UTC
Re: G320s, New and Improved!
Jon Elson
2001-09-06 17:44:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
mariss92705@y...
2001-09-06 18:03:23 UTC
Re: G320s, New and Improved!
Jon Elson
2001-09-06 22:28:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
Drew Rogge
2001-09-07 10:52:24 UTC
Re: [CAD_CAM_EDM_DRO] G320s, New and Improved!
beer@s...
2001-09-07 11:04:42 UTC
Re: Re: G320s, New and Improved!
Tim
2001-09-07 11:17:41 UTC
RE: [CAD_CAM_EDM_DRO] G320s, New and Improved!
mariss92705@y...
2001-09-07 19:06:31 UTC
Re: G320s, New and Improved!
M. SHABBIR
2001-09-08 10:04:36 UTC
servo motors
Tim Goldstein
2001-09-09 16:26:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
carlcnc@e...
2001-09-09 16:53:48 UTC
Re: G320s, New and Improved!
cadcamcenter@y...
2001-09-09 18:25:13 UTC
Re: G320s, New and Improved!
shymu@b...
2001-09-09 19:34:50 UTC
Re: G320s, New and Improved!
Tim Goldstein
2001-09-09 19:41:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
Jon Elson
2001-09-09 21:43:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
Tim Goldstein
2001-09-09 21:58:44 UTC
RE: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
mariss92705@y...
2001-09-10 00:08:28 UTC
Re: G320s, New and Improved!
mariss92705@y...
2001-09-10 00:24:19 UTC
Re: G320s, New and Improved!
cadcamcenter@y...
2001-09-10 00:24:35 UTC
Re: G320s, New and Improved!
mariss92705@y...
2001-09-10 00:46:26 UTC
Re: G320s, New and Improved!
Jon Elson
2001-09-10 11:15:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
machines@n...
2001-09-10 12:18:24 UTC
Open Letter to Mariss
Brian Walsh
2001-09-10 13:45:48 UTC
Re: [CAD_CAM_EDM_DRO] Open Letter to Mariss
rab@r...
2001-09-10 14:31:59 UTC
Re: Open Letter to Mariss
mariss92705@y...
2001-09-10 17:16:09 UTC
Re: Open Letter to Mariss
Robert Allen & Marsha Camp
2001-09-10 19:13:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
Tim Goldstein
2001-09-10 21:17:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: G320s, New and Improved!
machines@n...
2001-09-11 05:10:23 UTC
Re: Open Letter to Mariss
cadcamcenter@y...
2001-09-11 06:45:50 UTC
WTC tragedy
Jon Elson
2001-09-11 08:09:04 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
Pavel Korensky
2001-09-11 09:44:24 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
Bryan-TheBS-Smith
2001-09-11 12:08:12 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
Ian Wright
2001-09-11 13:08:25 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
info.host@b...
2001-09-11 14:41:02 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
cadcamcenter@y...
2001-09-11 15:26:25 UTC
Re: WTC tragedy
Paul
2001-09-11 15:45:53 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
mariss92705@y...
2001-09-11 15:51:24 UTC
Re: WTC tragedy
wanliker@a...
2001-09-11 16:06:31 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
shymu@b...
2001-09-11 16:27:23 UTC
Re: WTC tragedy
info.host@b...
2001-09-11 16:57:44 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
info.host@b...
2001-09-11 16:59:30 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
Carol & Jerry Jankura
2001-09-11 17:16:20 UTC
RE: [CAD_CAM_EDM_DRO] WTC tragedy
cadcamcenter@y...
2001-09-11 19:54:33 UTC
Re: WTC tragedy
cnc002@a...
2001-09-12 08:53:42 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
cnc002@a...
2001-09-12 08:56:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: WTC tragedy
JanRwl@A...
2001-09-12 10:52:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: WTC tragedy
zeff1015@a...
2001-09-12 11:10:27 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy
Art Fenerty
2001-09-12 11:39:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: WTC tragedy
cadcamcenter@y...
2001-09-12 16:21:05 UTC
WTC tragedy
mariss92705@y...
2001-09-12 18:24:55 UTC
Re: WTC tragedy
cadcamcenter@y...
2001-09-12 21:52:10 UTC
Re: WTC tragedy
cadcamcenter@y...
2001-09-12 22:08:30 UTC
Re: WTC tragedy
marble here
2001-09-12 22:09:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: WTC tragedy
marble here
2001-09-12 23:04:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: WTC tragedy
peter smith
2001-09-13 20:25:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: WTC tragedy
JanRwl@A...
2001-09-13 23:07:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: WTC tragedy
M. SHABBIR
2001-09-14 00:42:42 UTC
Re: [CAD_CAM_EDM_DRO] WTC tragedy