Re: [CAD_CAM_EDM_DRO] Gecko question
Posted by
Alan Marconett KM6VV
on 2001-11-19 10:35:30 UTC
Matt, Jon,
Probably, if you have a gameport (joystick) connector on the laptop!
Other possibilities are an external floppy port, PCMCIA slot(s), or USB
connectors.
(Didn't we go through all this a couple of months ago? Should be more
info in the archives.)
Alan KM6VV
Jon Elson wrote:
Probably, if you have a gameport (joystick) connector on the laptop!
Other possibilities are an external floppy port, PCMCIA slot(s), or USB
connectors.
(Didn't we go through all this a couple of months ago? Should be more
info in the archives.)
Alan KM6VV
Jon Elson wrote:
>
> Alan Marconett KM6VV wrote:
>
> > Hi Matt,
> >
> > Look for a mouse or external keyboard connector. You should be able to
> > find find +5V. Lacking these, try a 78L05 regulator off an asserted
> > CTS (use the +12V) or other output line.
>
> The game port (15 pin connector) has +5 V on pins 1, 8, 9 and 15.
>
> Jon
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Tom Eldredge
2001-03-27 07:33:21 UTC
Re: [CAD_CAM_EDM_DRO] Gecko question
mariss92705@y...
2001-03-27 11:21:00 UTC
Re: Gecko question
mariss92705@y...
2001-03-27 12:23:49 UTC
Re: Gecko question
mariss92705@y...
2001-03-27 20:53:51 UTC
Re: Gecko question
Tom Eldredge
2001-03-28 07:33:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Gecko question
pkranger63@y...
2001-11-18 15:20:58 UTC
Gecko question
shymu@b...
2001-11-18 17:36:52 UTC
Re: Gecko question
Alan Marconett KM6VV
2001-11-18 18:18:56 UTC
Re: [CAD_CAM_EDM_DRO] Gecko question
Jon Elson
2001-11-18 21:20:30 UTC
Re: [CAD_CAM_EDM_DRO] Gecko question
Alan Marconett KM6VV
2001-11-19 10:35:30 UTC
Re: [CAD_CAM_EDM_DRO] Gecko question
Al Schoepp
2001-11-20 11:04:22 UTC
Re: [CAD_CAM_EDM_DRO] Gecko question
aspaguy
2002-01-31 19:42:38 UTC
Gecko question
seanc62
2002-01-31 20:28:00 UTC
Re: Gecko question
mariss92705
2002-01-31 20:38:21 UTC
Re: Gecko question
aspaguy
2002-01-31 22:30:46 UTC
Re: Gecko question
mariss92705
2002-01-31 22:37:49 UTC
Re: Gecko question
Dan Mauch
2002-02-01 07:17:11 UTC
RE: [CAD_CAM_EDM_DRO] Gecko question
aspaguy
2002-02-01 17:52:56 UTC
Thanks Mariss Re: Gecko question