Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Posted by
Bill Vance
on 2001-11-23 22:22:55 UTC
Allways bearing in mind that some low quality/cheapo connectors don't solder
worth spit.....
Bill
worth spit.....
Bill
On Fri Nov 23 09:25:04 2001, mariss92705@..., <mariss92705@...> wrote:
>Peter,
>
>Do not use pliers! You will get a very poor, intermittent connection.
>By all means solder the wires to the pins if you don't have a
>crimping tool.
>
>Mariss
>
>--- In CAD_CAM_EDM_DRO@y..., cncnut@s... wrote:
>> Hi,
>>
>> Thanks to all who responded. You guys are great!!!
>>
>> Now if we are connecting the wires to connectors meant for crimping
>> tools, (and also for connecting to drivers, DB25, switches, etc.)
>and
>> one doesn't have a crimping tool, is using the poor man's plier
>just
>> as effective? And is there any harm soldering the wire to the
>> connector (meant for crimping) as well?
>>
>> Thanks
>>
>> Peter
>>
>> --- In CAD_CAM_EDM_DRO@y..., frenner@c... wrote:
>> > Hi,
>> >
>> > You have great replies but one thing to add: be sure to ground
>the
>> > shield at one end only. A "shield" grounded at both ends creates
>> > ground loops.
>> >
>> > Chopper drives are horrible EMI noise generators and can
>definitely
>> > cause problems with nearby instrumentation. I once had to treat
>the
>> > load as a pseudo-ballistic object and turn off the drives during
>a
>> > video frame-grab, simply because I couldn't keep the EMI bottled
>up
>> > with shielding.
>> >
>> > Fred R.
--
----------------------------------------------------------------------------
RKBA! ***** Blessings On THee, Oh Israel! ***** 4-19!
----------------+----------+--------------------------+---------------------
An _EFFECTIVE_ | Insured | All matter is vibration. | Let he who hath no
weapon in every | by COLT; | -- Max Plank | weapon sell his
hand = Freedom | DIAL | In the beginning was the | garment and buy a
on every side! | 1911-A1. | word. -- The Bible | sword.--Jesus Christ
----------------+----------+--------------------------+---------------------
Constitutional Government is dead, LONG LIVE THE CONSTITUTION!!!!!
----------------------------------------------------------------------------
Discussion Thread
cncnut@s...
2001-11-21 19:21:59 UTC
shielding for steppers
JanRwl@A...
2001-11-21 21:38:30 UTC
Re: [CAD_CAM_EDM_DRO] shielding for steppers
JanRwl@A...
2001-11-21 21:39:53 UTC
Re: [CAD_CAM_EDM_DRO] shielding for steppers
Jon Elson
2001-11-21 22:10:35 UTC
Re: [CAD_CAM_EDM_DRO] shielding for steppers
cncnut@s...
2001-11-22 10:12:30 UTC
Re: shielding for steppers
Jon Elson
2001-11-22 13:47:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
JanRwl@A...
2001-11-22 14:44:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
mariss92705@y...
2001-11-22 20:17:46 UTC
Re: shielding for steppers
Bill Vance
2001-11-23 02:10:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
wanliker@a...
2001-11-23 05:30:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
frenner@c...
2001-11-23 07:22:05 UTC
Re: shielding for steppers
cncnut@s...
2001-11-23 09:00:31 UTC
Re: shielding for steppers
mariss92705@y...
2001-11-23 09:25:09 UTC
Re: shielding for steppers
Carol & Jerry Jankura
2001-11-23 13:13:24 UTC
RE: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Alan Marconett KM6VV
2001-11-23 14:01:27 UTC
Re: shielding for steppers
JanRwl@A...
2001-11-23 14:42:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
mariss92705@y...
2001-11-23 15:41:19 UTC
Re: shielding for steppers
shymu@b...
2001-11-23 19:38:44 UTC
Re: shielding for steppers
Steve Smith
2001-11-23 20:26:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Bill Vance
2001-11-23 22:22:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
cncnut@s...
2001-11-24 02:25:40 UTC
Re: shielding for steppers
Bob Campbell
2001-11-24 07:18:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
mariss92705@y...
2001-11-24 11:00:28 UTC
Re: shielding for steppers
Alan Marconett KM6VV
2001-11-24 11:52:15 UTC
Re: shielding for steppers
JanRwl@A...
2001-11-24 13:53:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
JanRwl@A...
2001-11-24 14:29:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Paul
2001-11-24 17:20:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Steve Smith
2001-11-24 17:36:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers