Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Posted by
Paul
on 2001-11-24 17:20:11 UTC
Hi Jan
Those lumps of ceramic with the little round window in the top (eproms) can
be quite entertaining - Plug one in the wrong way round and power it up from
a current limiting 5V supply and just watch the electrons whiz around <g>
If you get the current right (~500mA), it won't smoke, but it sure is pretty.
Regards, Paul.
Those lumps of ceramic with the little round window in the top (eproms) can
be quite entertaining - Plug one in the wrong way round and power it up from
a current limiting 5V supply and just watch the electrons whiz around <g>
If you get the current right (~500mA), it won't smoke, but it sure is pretty.
Regards, Paul.
On Saturday 24 November 2001 10:29 pm, JanRwl@... wrote:
> (If
> you have never popped one or several apart (especially a "dead"
> microprocessor IC, or the like) and gawked at it under a 50-power
> microscope, you have missed one of the mind-bending pleasures of late-20th
> C. life!)
Discussion Thread
cncnut@s...
2001-11-21 19:21:59 UTC
shielding for steppers
JanRwl@A...
2001-11-21 21:38:30 UTC
Re: [CAD_CAM_EDM_DRO] shielding for steppers
JanRwl@A...
2001-11-21 21:39:53 UTC
Re: [CAD_CAM_EDM_DRO] shielding for steppers
Jon Elson
2001-11-21 22:10:35 UTC
Re: [CAD_CAM_EDM_DRO] shielding for steppers
cncnut@s...
2001-11-22 10:12:30 UTC
Re: shielding for steppers
Jon Elson
2001-11-22 13:47:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
JanRwl@A...
2001-11-22 14:44:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
mariss92705@y...
2001-11-22 20:17:46 UTC
Re: shielding for steppers
Bill Vance
2001-11-23 02:10:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
wanliker@a...
2001-11-23 05:30:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
frenner@c...
2001-11-23 07:22:05 UTC
Re: shielding for steppers
cncnut@s...
2001-11-23 09:00:31 UTC
Re: shielding for steppers
mariss92705@y...
2001-11-23 09:25:09 UTC
Re: shielding for steppers
Carol & Jerry Jankura
2001-11-23 13:13:24 UTC
RE: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Alan Marconett KM6VV
2001-11-23 14:01:27 UTC
Re: shielding for steppers
JanRwl@A...
2001-11-23 14:42:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
mariss92705@y...
2001-11-23 15:41:19 UTC
Re: shielding for steppers
shymu@b...
2001-11-23 19:38:44 UTC
Re: shielding for steppers
Steve Smith
2001-11-23 20:26:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Bill Vance
2001-11-23 22:22:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
cncnut@s...
2001-11-24 02:25:40 UTC
Re: shielding for steppers
Bob Campbell
2001-11-24 07:18:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
mariss92705@y...
2001-11-24 11:00:28 UTC
Re: shielding for steppers
Alan Marconett KM6VV
2001-11-24 11:52:15 UTC
Re: shielding for steppers
JanRwl@A...
2001-11-24 13:53:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
JanRwl@A...
2001-11-24 14:29:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Paul
2001-11-24 17:20:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers
Steve Smith
2001-11-24 17:36:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: shielding for steppers