CAD CAM EDM DRO - Yahoo Group Archive

Re: G201 Question for Mariss

Posted by mariss92705
on 2002-04-05 17:11:47 UTC
Hi,

Actually it would be much better to connect all "DISABLE" inputs
together and short them via a switch to terminal 12 of only one drive
(your pick). Don't connect the terminal 12s of all drives together;
it's a common mode noise thing.

Mariss

--- In CAD_CAM_EDM_DRO@y..., "rsgoldner" <rgoldner@i...> wrote:
> I have three G201s. Can I connect all three aux gnd pins (pin 12)
to
> one side of a switch and all three disable pins to the other side
of
> a switch? The idea is to disable all three motors with one switch.
> Is aux gnd the same as the power supply gnd and could I just
connect
> all the disable pins to the PS gnd through the switch instead?
>
> Thanks!

Discussion Thread

rsgoldner 2002-04-05 16:38:46 UTC G201 Question for Mariss mariss92705 2002-04-05 17:11:47 UTC Re: G201 Question for Mariss Raymond Heckert 2002-04-05 20:25:45 UTC Re: [CAD_CAM_EDM_DRO] G201 Question for Mariss rsgoldner 2002-04-06 03:08:34 UTC Re: G201 Question for Mariss RC 2002-04-06 03:24:04 UTC Re: [CAD_CAM_EDM_DRO] G201 Question for Mariss rsgoldner 2002-04-06 06:37:40 UTC Re: G201 Question for Mariss RC 2002-04-06 06:59:50 UTC Re: [CAD_CAM_EDM_DRO] Re: G201 Question for Mariss batwings@i... 2002-04-06 14:23:42 UTC Re: [CAD_CAM_EDM_DRO] Re: G201 Question for Mariss n4onl 2002-04-15 19:52:46 UTC G201 Question for Mariss mariss92705 2002-04-15 21:33:16 UTC Re: G201 Question for Mariss n4onl 2002-04-16 20:39:24 UTC Re: G201 Question for Mariss n4onl 2002-04-17 04:50:18 UTC Re: G201 Question for Mariss cadcamcenter 2002-04-17 05:12:17 UTC Re: G201 Question for Mariss JanRwl@A... 2002-04-17 20:56:58 UTC Re: [CAD_CAM_EDM_DRO] Re: G201 Question for Mariss mariss92705 2002-04-17 22:29:27 UTC Re: G201 Question for Mariss