Re: Surface Mounting Components.

Bob,
OK no problem, btw it's not an intentional barrier, mst people get past
it by upgrading their browser.
http://home.swbell.net/hans_w/surfacem.htm

I'll see about adding conventional links along side of the buttons...
regards
Hans Wedemeyer

Bob Bachman wrote:

> Hans,
>
> I like to suggest you type in the complete url to that page
> so those of us who can't get past your 'button barrier'
> can view your idea(s).
>
> Thanks,
>
> Bob
>
> At 05:19 PM 12/24/99 -0600, you wrote:
> >From: hansw <hansw@...>
> >
> >If anyone is interested in surface mounting components...
> >
> >I needed a Hot Air Pencil to do some surface mount work, but did not
> >like the price of commercial units ( I'm just cheap that way !)
> >So I made one... It's described at my web site...
> >
> >http://home.swbell.net/hans_w
> >
> >I was surprised how easy and cheap it was to make it, and how well it
> >works... The cheapest commercial unit I found was about $600 this
> home
> >made unit cost all of $45...!
> >
> >regards
> >Hans Wedemeyer
> >
> >>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> >To Unsubscribe, read archives, change to or from digest.
> >Go to: http://www.onelist.com/isregistered.cgi
> >Log on, and you will go to Member Center, and you can make changes
> there.
> >For the FAQ, go to http://www.ktmarketing.com/faq.html
> >bill,
> >List Manager
> >
> >
>
>
> ------------------------------------------------------------------------
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes
> there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
> ----------------------------------------------------------------
> [Image]
> Click Here
>