Re: Surface Mounting Components.
Posted by
Ward Merkouris
on 1999-12-24 22:01:12 UTC
Hans,
A hot air unit like this does work great, doesn't it? You'll also find that you can weld plastics with a unit like this. Just
get some plastic rod (thin) and weld plastic the same way you'd weld steel with an oxyacetylene torch. It's great for filling
in rock gouges in the bottom of kayaks too.
Ward M.
ward@...
hansw wrote:
A hot air unit like this does work great, doesn't it? You'll also find that you can weld plastics with a unit like this. Just
get some plastic rod (thin) and weld plastic the same way you'd weld steel with an oxyacetylene torch. It's great for filling
in rock gouges in the bottom of kayaks too.
Ward M.
ward@...
hansw wrote:
> From: hansw <hansw@...>
>
> If anyone is interested in surface mounting components...
>
> I needed a Hot Air Pencil to do some surface mount work, but did not
> like the price of commercial units ( I'm just cheap that way !)
> So I made one... It's described at my web site...
>
> http://home.swbell.net/hans_w
>
> I was surprised how easy and cheap it was to make it, and how well it
> works... The cheapest commercial unit I found was about $600 this home
> made unit cost all of $45...!
>
> regards
> Hans Wedemeyer
>
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
Discussion Thread
hansw
1999-12-24 15:19:05 UTC
Surface Mounting Components.
Bob Bachman
1999-12-24 19:11:58 UTC
Re: Surface Mounting Components.
hansw
1999-12-24 16:45:48 UTC
Re: Surface Mounting Components.
Bob Bachman
1999-12-24 20:07:23 UTC
Re: Surface Mounting Components.
hansw
1999-12-24 17:10:27 UTC
Re: Surface Mounting Components.
hansw
1999-12-24 17:18:25 UTC
Re: Surface Mounting Components.
George Potter
1999-12-24 17:44:55 UTC
Re: Surface Mounting Components.
Bob Bachman
1999-12-24 21:17:55 UTC
Re: Surface Mounting Components.
hansw
1999-12-24 19:40:11 UTC
Re: Surface Mounting Components.
hansw
1999-12-24 19:42:19 UTC
Re: Surface Mounting Components.
Ward Merkouris
1999-12-24 22:01:12 UTC
Re: Surface Mounting Components.
Bertho Boman
1999-12-24 22:24:15 UTC
Re: Surface Mounting Components.
Earl J Morris
1999-12-25 03:28:04 UTC
Re: Surface Mounting Components.
hansw
1999-12-25 08:35:46 UTC
Re: Surface Mounting Components.
hansw
1999-12-25 08:36:28 UTC
Re: Surface Mounting Components.
hansw
1999-12-25 08:38:02 UTC
Re: Surface Mounting Components.
SNTLewis@x...
1999-12-25 18:22:38 UTC
Re: Surface Mounting Components.
Earl J Morris
1999-12-25 18:28:20 UTC
Re: Surface Mounting Components.
Earl J Morris
1999-12-25 18:38:00 UTC
Re: Surface Mounting Components.
hansw
1999-12-25 19:01:48 UTC
Re: Surface Mounting Components.
Earl J Morris
1999-12-25 20:10:10 UTC
Re: Surface Mounting Components.
Marshall Pharoah
1999-12-26 08:24:27 UTC
Re: Surface Mounting Components.
hansw
1999-12-26 09:44:34 UTC
Re: Surface Mounting Components.
Darrell
1999-12-26 23:29:04 UTC
Re: Surface Mounting Components.
Jon Elson
1999-12-27 14:03:28 UTC
Re: Surface Mounting Components.
hansw
1999-12-27 14:29:00 UTC
Re: Surface Mounting Components.