Re: Surface Mounting Components.

Hi Hans,

Great idea!!! (meaning the hot air "iron").

One question though .... do you have the air pump
running continuously, or only switch on when you want
hot air? (question being for both technique, and also ...
if running continuously, temp control somewhat easier
than if air turned on for short periods of time.

Thanks (for both your clever project, and in advance for your answer).

Regards,
George Potter




hansw wrote:

> From: hansw <hansw@...>
>
> Bob,
> OK no problem, btw it's not an intentional barrier, mst people get past
> it by upgrading their browser.
> http://home.swbell.net/hans_w/surfacem.htm
>
> I'll see about adding conventional links along side of the buttons...
> regards
> Hans Wedemeyer
>
> Bob Bachman wrote:
>
> > Hans,
> >
> > I like to suggest you type in the complete url to that page
> > so those of us who can't get past your 'button barrier'
> > can view your idea(s).
> >
> > Thanks,
> >
> > Bob
> >
> > At 05:19 PM 12/24/99 -0600, you wrote:
> > >From: hansw <hansw@...>
> > >
> > >If anyone is interested in surface mounting components...
> > >
> > >I needed a Hot Air Pencil to do some surface mount work, but did not
> > >like the price of commercial units ( I'm just cheap that way !)
> > >So I made one... It's described at my web site...
> > >
> > >http://home.swbell.net/hans_w
> > >
> > >I was surprised how easy and cheap it was to make it, and how well it
> > >works... The cheapest commercial unit I found was about $600 this
> > home
> > >made unit cost all of $45...!
> > >
> > >regards
> > >Hans Wedemeyer
> > >
> > >>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> > discussion of shop built systems in the above catagories.
> > >To Unsubscribe, read archives, change to or from digest.
> > >Go to: http://www.onelist.com/isregistered.cgi
> > >Log on, and you will go to Member Center, and you can make changes
> > there.
> > >For the FAQ, go to http://www.ktmarketing.com/faq.html
> > >bill,
> > >List Manager
> > >
> > >
> >
> >
> > ------------------------------------------------------------------------
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> > discussion of shop built systems in the above catagories.
> > To Unsubscribe, read archives, change to or from digest.
> > Go to: http://www.onelist.com/isregistered.cgi
> > Log on, and you will go to Member Center, and you can make changes
> > there.
> > For the FAQ, go to http://www.ktmarketing.com/faq.html
> > bill,
> > List Manager
> >
> > ----------------------------------------------------------------
> > [Image]
> > Click Here
> >
>
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager