Re: Surface Mounting Components.

Hans,

Thanks, that worked fine. I didn't mean to imply it was
intentional. I prefer not to upgrade beyond Netscape 3
on this old laptop being short of memory, disk space, etc.

Bob

>OK no problem, btw it's not an intentional barrier, mst people get past
>it by upgrading their browser.
>http://home.swbell.net/hans_w/surfacem.htm
>
>I'll see about adding conventional links along side of the buttons...
>regards
>Hans Wedemeyer
>
>Bob Bachman wrote:
>
>> Hans,
>>
>> I like to suggest you type in the complete url to that page
>> so those of us who can't get past your 'button barrier'
>> can view your idea(s).
>>
>> Thanks,
>>
>> Bob
>>
>> At 05:19 PM 12/24/99 -0600, you wrote:
>> >From: hansw <hansw@...>
>> >
>> >If anyone is interested in surface mounting components...
>> >
>> >I needed a Hot Air Pencil to do some surface mount work, but did not
>> >like the price of commercial units ( I'm just cheap that way !)
>> >So I made one... It's described at my web site...
>> >
>> >http://home.swbell.net/hans_w
>> >
>> >I was surprised how easy and cheap it was to make it, and how well it
>> >works... The cheapest commercial unit I found was about $600 this
>> home
>> >made unit cost all of $45...!
>> >
>> >regards
>> >Hans Wedemeyer
>> >
>> >>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>> discussion of shop built systems in the above catagories.
>> >To Unsubscribe, read archives, change to or from digest.
>> >Go to: http://www.onelist.com/isregistered.cgi
>> >Log on, and you will go to Member Center, and you can make changes
>> there.
>> >For the FAQ, go to http://www.ktmarketing.com/faq.html
>> >bill,
>> >List Manager
>> >
>> >
>>
>>
>> ------------------------------------------------------------------------
>> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>> discussion of shop built systems in the above catagories.
>> To Unsubscribe, read archives, change to or from digest.
>> Go to: http://www.onelist.com/isregistered.cgi
>> Log on, and you will go to Member Center, and you can make changes
>> there.
>> For the FAQ, go to http://www.ktmarketing.com/faq.html
>> bill,
>> List Manager
>>
>> ----------------------------------------------------------------
>> [Image]
>> Click Here
>>
>
>>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>