RE: [CAD_CAM_EDM_DRO] cutting vinyl
Posted by
Bob Campbell
on 2002-05-01 18:18:48 UTC
Paul,
Thanks for the information.
For cutting vinyl on a CNC router what control program and cad cam program
would be best?
Bob Campbell
-----Original Message-----
From: Paul N. [mailto:paulncc@...]
Sent: Tuesday, April 30, 2002 6:03 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
Bob....
Take a look at : http://www.littleeholdings.com/
might fill your needs.
Paul
Thanks for the information.
For cutting vinyl on a CNC router what control program and cad cam program
would be best?
Bob Campbell
-----Original Message-----
From: Paul N. [mailto:paulncc@...]
Sent: Tuesday, April 30, 2002 6:03 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
Bob....
Take a look at : http://www.littleeholdings.com/
might fill your needs.
Paul
----- Original Message -----
From: "Bob Campbell" <bob@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, April 30, 2002 1:14 AM
Subject: RE: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
> keongsan,
>
> Yes, but you will need to find a spring loaded pressure foot to control
the
> Z axis depth.
>
> In fact, I am currently looking for a spring loaded device to adapt my CNC
> router to cut vinyl.
>
> Bob
>
> -----Original Message-----
> From: keongsan [mailto:keongsan@...]
> Sent: Monday, April 29, 2002 5:43 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
>
>
> Hi,
>
> Can one use a tangential knife cutter and/or drag knife with a
> suitable holder on a mill?
>
> Thanks
>
> keongsan
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister
> site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Dave Lantz
2002-04-28 07:28:43 UTC
[CAD_CAM_EDM_DRO] TANGENTIAL?
Doug Harrison
2002-04-28 08:53:30 UTC
Re: [CAD_CAM_EDM_DRO] TANGENTIAL?
art
2002-04-28 09:07:59 UTC
Re: [CAD_CAM_EDM_DRO] TANGENTIAL?
Chris L
2002-04-28 09:26:56 UTC
Re: [CAD_CAM_EDM_DRO] TANGENTIAL?
Dave Lantz
2002-04-28 09:34:33 UTC
RE: [CAD_CAM_EDM_DRO] TANGENTIAL?
Doug Harrison
2002-04-28 09:38:43 UTC
Re: [CAD_CAM_EDM_DRO] TANGENTIAL?
Doug Harrison
2002-04-28 10:38:49 UTC
Re: [CAD_CAM_EDM_DRO] TANGENTIAL?
Shelbyville Design & Signworks
2002-04-28 10:45:13 UTC
Re: [CAD_CAM_EDM_DRO] TANGENTIAL?
ballendo
2002-04-29 01:58:25 UTC
Re: TANGENTIAL?
Dave Lantz
2002-04-29 04:56:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
CL
2002-04-29 05:46:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
CL
2002-04-29 05:49:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
Dave Lantz
2002-04-29 05:50:02 UTC
RE: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
batwings@i...
2002-04-29 06:16:33 UTC
Modem?
Dave Lantz
2002-04-29 06:30:57 UTC
RE: [CAD_CAM_EDM_DRO] Modem?
Stan Stocker
2002-04-29 07:07:12 UTC
Re: [CAD_CAM_EDM_DRO] Modem?
Bill Vance
2002-04-29 11:53:44 UTC
Re: [CAD_CAM_EDM_DRO] Modem?
CL
2002-04-29 12:51:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
Alan Marconett KM6VV
2002-04-29 14:18:32 UTC
Re: TANGENTIAL?
Bruce Harper
2002-04-29 14:36:45 UTC
RE: [CAD_CAM_EDM_DRO] Modem?
Bill Vance
2002-04-29 15:53:52 UTC
Re: [CAD_CAM_EDM_DRO] Modem?
studleylee
2002-04-29 16:09:40 UTC
Re: TANGENTIAL?
studleylee
2002-04-29 16:11:47 UTC
Re: TANGENTIAL?
keongsan
2002-04-29 17:42:55 UTC
Re: TANGENTIAL?
Bob Campbell
2002-04-29 20:08:46 UTC
RE: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
CL
2002-04-30 05:58:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
IMService
2002-04-30 07:45:32 UTC
Re: RE: Re: TANGENTIAL?
Paul N.
2002-04-30 09:14:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: TANGENTIAL?
batwings@i...
2002-04-30 09:26:18 UTC
unsub'd
Bob Campbell
2002-05-01 18:18:48 UTC
RE: [CAD_CAM_EDM_DRO] cutting vinyl