CAD CAM EDM DRO - Yahoo Group Archive

Cheap Power Supply was Re: low cost drivers

on 2002-05-31 18:54:25 UTC
Careful here, this is dual secondary transformer
rated at 8 amps/28 volts OR 4 amps/56 volts, but
NOT 8 amps/56 volts. Still a good deal though.

Cheers,
Steve Stallings
www.pmdx.com

--- In CAD_CAM_EDM_DRO@y..., "mariss92705" <mariss92705@y...> wrote:
> RC,
>
> Try http://www.skycraftsurplus.com/ go to products, go to
> transformers, go to 24 to 28 VAC transformers. It'll be the last
item
> on the page.
>
> Mariss
>
> --- In CAD_CAM_EDM_DRO@y..., "RC" <asdf@c...> wrote:
> > Hi... I thought I check out the 56 volt transformer, was it at the
> > skycraftsurplus web site? I went there and couldn't find it.....
> >
> > thanks
> > RC
> > ----- Original Message -----
> > From: mariss92705 <mariss92705@y...>
> > To: <CAD_CAM_EDM_DRO@y...>
> > Sent: Friday, May 31, 2002 3:53 PM
> > Subject: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost
> drivers
> >
> >
> > > Hi,
> > >
> > > I went to this link and noticed a 56 volt AC, 8A transformer
for
> $20.
> > > Add a 10,000 uF / 100VDC cap (DigiKey # P10040-ND $15.25 each),
a
> > > 25A, 400VDC bridge rectifier (DigiKey # GBPC1506-ND $2.88 each)
> and
> > > you have a nice 75VDC @ 8A, 600W power supply for about $38. You
> > > could do it for less if you got the cap surplus somewhere.
> > >
> > > Mariss

Discussion Thread

rekmac 2002-05-30 13:01:54 UTC low cost drivers JanRwl@A... 2002-05-30 16:40:38 UTC Re: [CAD_CAM_EDM_DRO] low cost drivers Randy Gordon-Gilmore 2002-05-30 17:01:29 UTC Re: [CAD_CAM_EDM_DRO] low cost drivers the_dutros 2002-05-30 22:38:04 UTC Re: low cost drivers Randy Gordon-Gilmore 2002-05-30 23:03:32 UTC Re: [CAD_CAM_EDM_DRO] Re: low cost drivers alenz2002 2002-05-31 04:00:38 UTC Re: low cost drivers turbulatordude 2002-05-31 05:05:04 UTC Re: low cost drivers Carol & Jerry Jankura 2002-05-31 06:37:29 UTC RE: [CAD_CAM_EDM_DRO] Re: low cost drivers the_dutros 2002-05-31 07:08:17 UTC Re: low cost drivers - reality Mel Williams 2002-05-31 08:52:05 UTC RE: [CAD_CAM_EDM_DRO] low cost drivers rekmac 2002-05-31 12:10:19 UTC Re: low cost drivers mariss92705 2002-05-31 15:53:44 UTC Cheap Power Supply was Re: low cost drivers Les Watts 2002-05-31 16:14:34 UTC Re: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost drivers JanRwl@A... 2002-05-31 17:18:48 UTC Re: [CAD_CAM_EDM_DRO] Re: low cost drivers stevenson_engineers 2002-05-31 17:27:05 UTC Re: low cost drivers RC 2002-05-31 17:29:06 UTC Re: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost drivers RC 2002-05-31 17:33:13 UTC Re: [CAD_CAM_EDM_DRO] Re: low cost drivers mariss92705 2002-05-31 17:34:36 UTC Cheap Power Supply was Re: low cost drivers RC 2002-05-31 17:56:51 UTC Re: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost drivers Les Watts 2002-05-31 18:26:28 UTC Re: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost drivers JanRwl@A... 2002-05-31 18:46:09 UTC Re: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost drivers stephen_stallings 2002-05-31 18:54:25 UTC Cheap Power Supply was Re: low cost drivers Tim Goldstein 2002-06-01 10:07:06 UTC RE: [CAD_CAM_EDM_DRO] low cost drivers RC 2002-06-01 13:15:48 UTC Re: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost drivers JanRwl@A... 2002-06-01 20:04:04 UTC Re: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost drivers StevenManzer 2002-06-26 02:04:22 UTC Cheap Power Supply was Re: low cost drivers Carlos Guillermo 2002-06-26 05:30:51 UTC RE: [CAD_CAM_EDM_DRO] Cheap Power Supply was Re: low cost drivers steveggca 2002-06-26 06:01:58 UTC Cheap Power Supply was Re: low cost drivers ballendo 2002-06-27 05:26:03 UTC Cheap Power Supply was Re: low cost drivers