RE: [CAD_CAM_EDM_DRO] EMC steps/rev calibration

I think you have the wrong value. Your encoders are likely 500 line
which gives you 2000 counts per rev. So, you really need 10,000 as your
factor.

Tim
[Denver, CO]

> Alan:
>
> Thanks for trying. I wish it was as simple as mis reading the jumper
> setting. I've tried all four positions, and am convinced I have that
> part right.
>
> I am now running the G340 at 1x, 500 cpr encoder, and 5 tpi
> screw...which should make INPUT_SCALE 500*5 or 2500. I am using
> steppermod. A one inch jog results in the motor turning about 1.25
> revs instead of 5.