Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES

http://www.surplussales.com/PowerTra.html and look at the top one. 17 vac @
28 amps would give you more than enough reserve. Would turn out pretty much
right at 24 VDC after you rectify the output. Add a cap and a bridge and you
will be all set.

Tim
[Denver, CO]

----- Original Message -----
> Thanks for the advice, Tim. The white papers you pointed me to are very
informative. After checking out the power supply in question, it is a
switching power supply (rats!). Here's the url if anyone wants to look at
it: http://www.mpja.com/product.asp?product=12613+PS I sure don't need
extra headaches right now, so I guess I'm still on the hunt for a power
supply and information about them. I will take your advice and do some more
searching through the group's posts. Anyone with a good source for a 24v
linear power supply is welcome to help me out.
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/