CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: POWER SUPPLIES

Posted by j.guenther
on 2002-09-23 12:43:12 UTC
Although I did not look at it on a scope it appears to need the external cap
to smooth the output. I think the output tends to pulse instead of being
smooth DC as you would think. I can put a scope on it to see, but I did not
have my scope working at the time I was fooling around with it.

John Guenther
Sterling, Virginia

> -----Original Message-----
> From: kimvellore [mailto:kim@...]
> Sent: Monday, September 23, 2002 15:30 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: POWER SUPPLIES
>
>
> Just inquisitive, the specs of the power supply says 1% regulation so
> why add extra caps at the output?. It should have enough inside the
> supply itself to work if operated within the specs. Unless you have
> long wires to the load and have a voltage drop due to wire resistance.
> Anyone have a good explanation for it?
> Kim
>
>
> --- In CAD_CAM_EDM_DRO@y..., Randy Gordon-Gilmore <zephyrus@r...>
> wrote:
> > At 11:19 AM 9/23/2002 -0700, J wrote:
> >
> > >in question, it is a switching power supply (rats!). Here's the
> url if
> > anyone wants >to look at it:
> > http://www.mpja.com/product.asp?product=12613+PS
> >
> > Jared, I'm using this power supply with the Camtronics 2A driver
> board kit
> > and Sherline's Size 23 stepper motors. It works fine. I have a 5-
> 6000
> > mfd cap on the output (unit is at home and I'm not, or I'd give you
> an
> > exact number.)
> >
> > Where I work we use stepper motors with chopper drives in various
> products
> > (admittedly mostly Size 17 motors) and don't have a linear supply
> in any
> > of them. I asked our head EE about the linear vs switching power
> supply
> > thing a while back, and he said that the motor will not know the
> > difference.
> >
> > Best regards,
> >
> > Randy
> >
> > Randy Gordon-Gilmore ,----.___________ ______________
> _________________
> > ProtoTrains // = = === == || == == == = || == == ==
> = == =|
> > Rio Vista, CA, USA /-O==O------------o==o------------o==o-----------
> o==o-'
> > zephyrus@r... http://www.prototrains.com
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> as a sister site to the CCED group, as many of the same members
> are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

J 2002-09-23 04:56:54 UTC POWER SUPPLIES caudlet 2002-09-23 06:11:30 UTC Re: POWER SUPPLIES turbulatordude 2002-09-23 06:32:21 UTC Re: POWER SUPPLIES Tim Goldstein 2002-09-23 09:17:05 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES Peter 2002-09-23 09:19:47 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES J 2002-09-23 11:19:14 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES Tim Goldstein 2002-09-23 11:33:46 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES Randy Gordon-Gilmore 2002-09-23 11:35:58 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES j.guenther 2002-09-23 11:36:45 UTC RE: [CAD_CAM_EDM_DRO] POWER SUPPLIES Jon Elson 2002-09-23 11:38:39 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES Tim Goldstein 2002-09-23 11:45:43 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES kimvellore 2002-09-23 12:29:44 UTC Re: POWER SUPPLIES Tim Goldstein 2002-09-23 12:40:05 UTC Re: [CAD_CAM_EDM_DRO] Re: POWER SUPPLIES j.guenther 2002-09-23 12:43:12 UTC RE: [CAD_CAM_EDM_DRO] Re: POWER SUPPLIES Randy Gordon-Gilmore 2002-09-23 12:45:28 UTC Re: POWER SUPPLIES w.higdon@a... 2002-09-23 13:34:52 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES caudlet 2002-09-23 16:41:44 UTC Re: POWER SUPPLIES JJ 2002-09-23 16:52:25 UTC RE: [CAD_CAM_EDM_DRO] POWER SUPPLIES J 2002-09-23 17:57:37 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES Jon Elson 2002-09-23 21:54:54 UTC Re: [CAD_CAM_EDM_DRO] Re: POWER SUPPLIES Jon Elson 2002-09-23 21:58:50 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES Tim Goldstein 2002-09-23 22:05:53 UTC RE: [CAD_CAM_EDM_DRO] Re: POWER SUPPLIES Larry Edinger 2002-09-24 15:48:27 UTC Re: [CAD_CAM_EDM_DRO] POWER SUPPLIES