Re: mastercam
Posted by
jeffdavis516
on 2002-10-08 20:42:06 UTC
I'm not sure about version 6, but with the newer version there is a
security dongle that protects the software from being copied. If you
don't have or need this then their may have been a license file that
you need to get it running. My guess is just because you have the
disks does not mean that the software will run. You should contact
CNC Software " www.mastercam.com " and tell them what you have and
find out if you have everything to make it run. Then ask about
transfering the license to you so you can sell it.
Jeff
http://www.homecnc.info
security dongle that protects the software from being copied. If you
don't have or need this then their may have been a license file that
you need to get it running. My guess is just because you have the
disks does not mean that the software will run. You should contact
CNC Software " www.mastercam.com " and tell them what you have and
find out if you have everything to make it run. Then ask about
transfering the license to you so you can sell it.
Jeff
http://www.homecnc.info
--- In CAD_CAM_EDM_DRO@y..., Jerry Kimberlin <kimberln@a...> wrote:
> LEW BEST wrote:
>
> > Most of what you said is way over my head but would it not be
legal to
> > resell since it's original disks, not copies? This was a
bankruptcy
> > auction; the original company is out of business.
>
> In my opinion it would be perfectly legal to resell since you are
> selling the original disks. You might want to check with
> Mastercam to be able to sell the ability to register the software
> to the buyer if the buyer wants. But since it is a serially
> numbered copy you should be able to sell it.
>
> JerryK
Discussion Thread
Victor Cantu Jr.
2001-03-30 02:56:52 UTC
mastercam
Marcus & Eva
2001-03-30 07:40:36 UTC
Re: [CAD_CAM_EDM_DRO] mastercam
Doug Harrison
2001-03-30 13:18:39 UTC
Re: [CAD_CAM_EDM_DRO] mastercam
LEW BEST
2002-10-08 17:20:45 UTC
mastercam
Marcus & Eva
2002-10-08 19:28:33 UTC
Re: [CAD_CAM_EDM_DRO] mastercam
LEW BEST
2002-10-08 20:03:37 UTC
RE: [CAD_CAM_EDM_DRO] mastercam
Jerry Kimberlin
2002-10-08 20:20:52 UTC
Re: [CAD_CAM_EDM_DRO] mastercam
jeffdavis516
2002-10-08 20:42:06 UTC
Re: mastercam
LEW BEST
2002-10-08 20:45:21 UTC
RE: [CAD_CAM_EDM_DRO] Re: mastercam
caudlet
2002-10-09 05:04:54 UTC
Re: mastercam
stevenson_engineers
2002-10-09 07:41:24 UTC
Re: mastercam
Francisco Simon
2002-10-09 18:20:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
Marcus & Eva
2002-10-09 19:42:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
vrsculptor
2002-10-09 19:59:15 UTC
Re: mastercam
glee@i...
2002-10-09 23:54:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
stevenson_engineers
2002-10-10 11:56:00 UTC
Re: mastercam
Jerry Kimberlin
2002-10-10 12:13:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
Marv Frankel
2002-10-10 13:03:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
Clint D
2002-10-10 14:26:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
Tom @ ...
2002-10-10 15:09:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
John Branlund
2002-10-10 15:30:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
stevenson_engineers
2002-10-10 16:59:00 UTC
Re: mastercam
michael pettengill
2002-10-12 12:37:15 UTC
Re: mastercam
Ian W. Wright
2002-10-13 00:13:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam
Scott A. Stephens
2002-10-13 00:40:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: mastercam