Re: [CAD_CAM_EDM_DRO] Teflon
Posted by
Brian
on 2002-10-11 22:06:07 UTC
Hi, yes teflon can be machined easily. It takes a well honed edge for a nice
clean cut. Watch the speed, too much speed can cause problems. Clamping too
heavy will cause cold forming/flow/distortion. Otherwise it cuts much like
UHMW.....most shops cut it without cutting fluid to prevent
contamination(food use equipment). cul brian f.
clean cut. Watch the speed, too much speed can cause problems. Clamping too
heavy will cause cold forming/flow/distortion. Otherwise it cuts much like
UHMW.....most shops cut it without cutting fluid to prevent
contamination(food use equipment). cul brian f.
----- Original Message -----
From: "Bill Vance" <ccq@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, October 10, 2002 7:48 AM
Subject: [CAD_CAM_EDM_DRO] Teflon
> Anyone know if teflon is machinable, or only moldable? Also, are there
any
> special considerations, or materials, etc., needed to mold it?
>
> Thanks.
>
> Bill
>
> --
> --------------------------------------------------------------------------
--
> RKBA! ***** Blessings On Thee, Oh Israel! *****
4-19!
> ----------------+----------+--------------------------+-------------------
--
> An _EFFECTIVE_ | Insured | All matter is vibration. | Let he who hath no
> weapon in every | by COLT; | -- Max Plank | weapon sell his
> hand = Freedom | DIAL | In the beginning was the | garment and buy a
> on every side! | 1911-A1. | word. -- The Bible | sword.--Jesus
Christ
> ----------------+----------+--------------------------+-------------------
--
>
> Constitutional Government is dead, LONG LIVE THE CONSTITUTION!!!!!
>
> --------------------------------------------------------------------------
--
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
Erik Reikes
2002-10-09 20:37:59 UTC
Heck of a time tuning servo motors.
MIKEC@W...
2002-10-09 21:55:43 UTC
Re: [CAD_CAM_EDM_DRO] Heck of a time tuning servo motors.
deanc500
2002-10-09 22:19:36 UTC
Re: Heck of a time tuning servo motors.
wanliker@a...
2002-10-09 23:00:12 UTC
Re: [CAD_CAM_EDM_DRO] Heck of a time tuning servo motors.
Erik Reikes
2002-10-09 23:27:03 UTC
Re: Heck of a time tuning servo motors.
Erik Reikes
2002-10-10 00:30:57 UTC
Re: Heck of a time tuning servo motors.
Bill Vance
2002-10-10 04:43:12 UTC
Teflon
Greg Jackson
2002-10-10 07:47:19 UTC
RE: [CAD_CAM_EDM_DRO] Re: Heck of a time tuning servo motors.
Dan Mauch
2002-10-10 08:51:37 UTC
RE: [CAD_CAM_EDM_DRO] Heck of a time tuning servo motors.
Jon Elson
2002-10-10 09:36:25 UTC
Re: [CAD_CAM_EDM_DRO] Teflon
Marcus & Eva
2002-10-10 09:53:49 UTC
Re: [CAD_CAM_EDM_DRO] Teflon
Tim Goldstein
2002-10-10 10:06:54 UTC
Re: [CAD_CAM_EDM_DRO] Teflon
Erik Reikes
2002-10-10 12:35:24 UTC
Re: Heck of a time tuning servo motors.
Tim Goldstein
2002-10-10 12:59:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Heck of a time tuning servo motors.
Erik Reikes
2002-10-10 13:14:53 UTC
Re: Heck of a time tuning servo motors.
Erik Reikes
2002-10-10 15:11:00 UTC
Re: Heck of a time tuning servo motors.
wanliker@a...
2002-10-10 16:21:54 UTC
Re: [CAD_CAM_EDM_DRO] Teflon
Myron Cherry
2002-10-10 18:39:30 UTC
Re: [CAD_CAM_EDM_DRO] Heck of a time tuning servo motors.
Jon Elson
2002-10-10 23:31:34 UTC
Re: Heck of a time tuning servo motors.
Brian
2002-10-11 22:06:07 UTC
Re: [CAD_CAM_EDM_DRO] Teflon