RE: [CAD_CAM_EDM_DRO] Re: DRO Boards

Souns a bit like coke classic.
Nobody missed it till its gone.

So Dan, as there seems to be some interest maybe a quick poll, and if
enough poeople prepay maybe one more run ?


-----Original Message-----
From: j.guenther [mailto:j.guenther@...]
Sent: Wednesday, November 13, 2002 9:23 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: DRO Boards


Dam, I new I should have moved that up on my priority list. So much for
smdromod and EMC on my setup!

John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia

> -----Original Message-----
> From: Dan Mauch [mailto:dmauch@...]
> Sent: Wednesday, November 13, 2002 10:17 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: RE: [CAD_CAM_EDM_DRO] Re: DRO Boards
>
>
>
> The DRO boards are all sold and like I said there wasn't enough sales
> to justify and outlay of $500 for more boards so the point is moot.
> But with deskncrt it was possible to shut off the power to the stepper

> motors and read the encoder positions like a dro. As I recall EMC will

> also do this. If you are running a stepper system using turbocnc and
> your system is running correctly then you don't need a dro.
> dan
> -----Original Message-----
> From: Van Der Sandt Coert [mailto:vandersandtc@...]
> Sent: Tuesday, November 12, 2002 11:04 PM
> To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
> Subject: RE: [CAD_CAM_EDM_DRO] Re: DRO Boards
>
>
> Hi Dan
> A friend asked me recently whether he can cnc his Collet mill that is
> already fitted with a dro system and drive motors. I don't know much
> about DRO's so excuse me for asking stupid questions.
>
> Currently you can move the axis' on the mill with a switch forward and

> back and read the position from the DRO. Would it be possible to hook
> this DRO up to a computer somehow that runs something like Turbocnc?
> If possible, what are the steps needed? Is that perhaps what your DRO
> boards do?
>
> Thanks
> Coert
>
> -----Original Message-----
> From: macfool68 [mailto:gr8flyer7@...]
>
> --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote:
> >
> > I am considering discontinuing the Mauch/Kulaga DRO printed circuit
> > board for two reasons. Sales have been slow. Only 35 in 1 year and
> it
> > was made for a rapidly disappearing ISA slot.
> > I have one good board and 3 defective boards left. After the good
> board
> > is sold I doubt that I will reorder them unless there is more
> interest
> > in them.
> > Dan
>
>
> Confidentiality Warning
> =======================
> The contents of this e-mail and any accompanying documentation are
> confidential and any use thereof, in what ever form, by anyone other
> than the addressee is strictly prohibited.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]

> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble. http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be

a

> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill List Mom List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]

> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
> it if you have trouble. http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this
> to be a sister site to the CCED group, as many of the same members are

> there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/