RE: [CAD_CAM_EDM_DRO] Re: DRO Boards

Yes I probably will. I want to wait a few days to see if there is enough
interest in me making a batch but so far it look bleak. If so I will
locate the gerbers and email them to you next week.
Dan

-----Original Message-----
From: Tim Goldstein [mailto:timg@...]
Sent: Wednesday, November 13, 2002 9:06 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Cc: dmauch@...
Subject: Re: [CAD_CAM_EDM_DRO] Re: DRO Boards


Dan,

Would you be willing to make the board files available on an "open
sources" basis? That way if someone wants one they can either have a
board made as a prototype or use one of the programs like DeskPCB to
make the G-code to route one out.

If you are willing I would be happy to add it to the Kulaga DRO site I
host.

Tim
[Denver CO]
Sherline at Deep Discount
www.KTMarketing.com/Sherline

----- Original Message -----
> The DRO boards are all sold and like I said there wasn't enough sales
> to justify and outlay of $500 for more boards so the point is moot.
> But with deskncrt it was possible to shut off the power to the stepper

> motors and read the encoder positions like a dro. As I recall EMC will

> also do this. If you are running a stepper system using turbocnc and
> your system is running correctly then you don't need a dro.
> dan



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/