Re: Max feedrate of ball screws?

--- In CAD_CAM_EDM_DRO@y..., "torsten98001" <torsten@g...> wrote:

> --- In CAD_CAM_EDM_DRO@y..., "dgmachinist" <scsm@m...> wrote:
> >
> > <snip>
> >> I am also wondering what the rest of your system is made of
> Motors, Drivers, Powersupply and Software.
> Multy step drivers capable of reaching the performance you wish?
>
> The goal of a good machine is in the proper balance of the
> components used.
> Can't build a race car with a pinto engine no mater how good the
> frame is designed.
>
> Good Luck

My machine will be driven by dual 300oz/in. on the X
axis, one 300oz on the Z, and I was thinking in the 300-600oz on the
Y.
I was thinking of setting up all the motors on a 2:1 ratio to double
the torque... I don't know yet.

The drivers are defenitely going to to be Gecko's (like, what else
is there to use?)<G>

For the power supply, I was either going to get the "BEaST", from
cnckits.com, or I was thinking about making my own...

For the software, I will be using Mach1. I have followed that
software since he decided to create it.

The rest of the machine will be Thomson shafting (supported, of
course) linear bearings, .750 6061 Aluminum. and of course, ball
screws.

Seth