Re: EDM troubles - update
Posted by
Richard
on 2003-08-24 08:26:26 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<davemucha@j...> wrote:
horizontally and the work 'on its side', hoping that flushing the
debris will be easier and more complete, especially if the hole needs
to be blind, and maybe help the whole process. Any thoughts? Richard
<davemucha@j...> wrote:
> I'm asuming that the flushing is poor at best, just peeing on theDave, I have been thinking of mounting my electrode feed head
> outside of the electrode,
horizontally and the work 'on its side', hoping that flushing the
debris will be easier and more complete, especially if the hole needs
to be blind, and maybe help the whole process. Any thoughts? Richard
Discussion Thread
turbulatordude
2003-08-10 16:29:00 UTC
EDM troubles
Zafar Salam
2003-08-10 21:14:40 UTC
Re: [CAD_CAM_EDM_DRO] EDM troubles
tomp_tag
2003-08-10 21:44:34 UTC
Re: [CAD_CAM_EDM_DRO] EDM troubles
Jon Elson
2003-08-10 23:08:33 UTC
Re: [CAD_CAM_EDM_DRO] EDM troubles
turbulatordude
2003-08-11 06:58:31 UTC
Re: EDM troubles
Jon Elson
2003-08-11 09:41:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM troubles
Andrew Mawson
2003-08-11 09:57:06 UTC
Re: EDM troubles
turbulatordude
2003-08-11 12:28:37 UTC
Re: EDM troubles
turbulatordude
2003-08-11 12:48:26 UTC
Re: EDM troubles
Richard
2003-08-11 16:39:52 UTC
Re: EDM troubles
turbulatordude
2003-08-11 19:50:11 UTC
Re: EDM troubles
tomp_tag
2003-08-11 22:39:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM troubles
turbulatordude
2003-08-23 05:22:50 UTC
Re: EDM troubles - update
tomp_tag
2003-08-23 23:19:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM troubles - update
turbulatordude
2003-08-24 07:23:09 UTC
Re: EDM troubles - update
Richard
2003-08-24 08:26:26 UTC
Re: EDM troubles - update
tomp_tag
2003-08-24 11:37:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM troubles - update
turbulatordude
2003-08-24 14:26:59 UTC
Re: EDM troubles - update
turbulatordude
2003-08-24 14:33:25 UTC
Re: EDM troubles - update