CAD CAM EDM DRO - Yahoo Group Archive

Re: EDM troubles - update

on 2003-08-24 14:26:59 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Richard" <phrh@w...> wrote:
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
> <davemucha@j...> wrote:
> > I'm asuming that the flushing is poor at best, just peeing on the
> > outside of the electrode,
>
> Dave, I have been thinking of mounting my electrode feed head
> horizontally and the work 'on its side', hoping that flushing the
> debris will be easier and more complete, especially if the hole
needs
> to be blind, and maybe help the whole process. Any thoughts?
Richard


I like it !

I have tiny 1/16 tubing that I can puresurize to 30-60 psi and little
brass fittings so I can jet the fluid into the hole.
gravity drain. and a simple splashguard to let the stuff drain.

Maybe I can bend my electrode upside down to finish this #6 tap and
instead of feeding down, feed up ?

deep tiny holes are a PITA!

Dave

Discussion Thread

turbulatordude 2003-08-10 16:29:00 UTC EDM troubles Zafar Salam 2003-08-10 21:14:40 UTC Re: [CAD_CAM_EDM_DRO] EDM troubles tomp_tag 2003-08-10 21:44:34 UTC Re: [CAD_CAM_EDM_DRO] EDM troubles Jon Elson 2003-08-10 23:08:33 UTC Re: [CAD_CAM_EDM_DRO] EDM troubles turbulatordude 2003-08-11 06:58:31 UTC Re: EDM troubles Jon Elson 2003-08-11 09:41:12 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM troubles Andrew Mawson 2003-08-11 09:57:06 UTC Re: EDM troubles turbulatordude 2003-08-11 12:28:37 UTC Re: EDM troubles turbulatordude 2003-08-11 12:48:26 UTC Re: EDM troubles Richard 2003-08-11 16:39:52 UTC Re: EDM troubles turbulatordude 2003-08-11 19:50:11 UTC Re: EDM troubles tomp_tag 2003-08-11 22:39:50 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM troubles turbulatordude 2003-08-23 05:22:50 UTC Re: EDM troubles - update tomp_tag 2003-08-23 23:19:26 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM troubles - update turbulatordude 2003-08-24 07:23:09 UTC Re: EDM troubles - update Richard 2003-08-24 08:26:26 UTC Re: EDM troubles - update tomp_tag 2003-08-24 11:37:06 UTC Re: [CAD_CAM_EDM_DRO] Re: EDM troubles - update turbulatordude 2003-08-24 14:26:59 UTC Re: EDM troubles - update turbulatordude 2003-08-24 14:33:25 UTC Re: EDM troubles - update