Re: [CAD_CAM_EDM_DRO] Re: Servo only moving one way

----- Original Message -----
From: <james_cullins@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, March 12, 2004 5:37 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Servo only moving one way


> I just ordered 100, I didn't realize your optos used that much current.
> Jim
> ----- Original Message -----
> From: <james_cullins@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, March 12, 2004 4:28 PM
> Subject: Re: [CAD_CAM_EDM_DRO] Re: Servo only moving one way
>
>
> > Thanks Marris, I'll order some.
> > Jim
> > ----- Original Message -----
> > From: "Mariss Freimanis" <mariss92705@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Friday, March 12, 2004 3:13 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: Servo only moving one way
> >
> >
> > > Jim,
> > >
> > > I'd strongly recommend you use a 74ACT541 instead.
> > >
> > > The 74HCT part has a 7.8 mA current sink capability which is
> > > insufficient for the 16 mA required by our drives. The 74ACT series
> > > has well over +/-24 mA output drive. Same pinout, same 1.5V
> > > threshold, same package. It also makes a dandy 3.3V to 5V level
> > > shifter to take care of those pesky new parallel port 3.3V signals.
> > >
> > > Mariss
> > >
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, <james_cullins@s...> wrote:
> > > > INDECO
> > > > On the sound Logic board the Led has a separate driver (
> > > uln2803 ) from
> > > > the signal (74hct541 ). The LED can work and the signal not work,
> > > so you
> > > > need to check on the DIR terminal pin and determine if it is
> > > changing form
> > > > 5v to 0.
> > > > If not please let Bob or me know and we will replace it for you.
> > > > Jim Cullins
> > > > Sound Logic
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Jon Elson" <elson@p...>
> > > > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > > > Sent: Friday, March 12, 2004 12:31 PM
> > > > Subject: Re: [CAD_CAM_EDM_DRO] Re: Servo only moving one way
> > > >
> > > >
> > > > >
> > > > >
> > > > > jmkasunich wrote:
> > > > >
> > > > > >--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...>
> > > wrote:
> > > > > >
> > > > > >
> > > > > >>INDECO wrote:
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >>> Yes I am using Gecko drives with Bob Campbells Breakout
> > > > > >>>board and Mach 2 software.
> > > > > >>>I have niether a logic probe or a oscilloscope to check it.
> > > > > >>>However the direction light on the board is not lit up as
> > > > > >>>the Y axis is, however the light on the Y only lights when
> > > > > >>>I jog to the left then goes out when I jog right. Is this
> > > > > >>>right?
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>That's the way it is SUPPOSED to work.
> > > > > >>
> > > > > >>
> > > > > >
> > > > > >The "Y" axis is acting the way it's supposed to. But nowhere
> > > > > >does he say that "X" is doing the same thing as Y,
> > > > > >
> > > > > Yes, I meant that the Y behavior was entirely normal, and the lack
> > > > > of a light on X was definitely related.
> > > > >
> > > > > > in fact he
> > > > > >says "the direction light on the board is not lit up as the
> > > > > >Y axis is", so that implies that the X light is _not_ working.
> > > > > >He previously stated that the problem axis is X, so the dark
> > > > > >LED points to a computer/parport/cable issue, NOT a drive
> > > > > >issue.
> > > > > >
> > > > > >
> > > > > Maybe. If the X LED is in SERIES with the LED in the driver's
> > > > > optocoupler, then a problem with wiring or the driver could cause
> > > the
> > > > > LED on the breakout board to not work.
> > > > >
> > > > > Jon
> > > > >
> > > > >
> > > > >
> > > > > Addresses:
> > > > > FAQ: http://www.ktmarketing.com/faq.html
> > > > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > > >
> > > > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > > wanliker@a...,
> > > > timg@k...
> > > > > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > > > [Moderators]
> > > > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > > >
> > > > > OFF Topic POSTS: General Machining
> > > > > If you wish to post on unlimited OT subjects goto:
> > > > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > > reach it if
> > > > you have trouble.
> > > > > http://www.metalworking.com/news_servers.html
> > > > >
> > > > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> > > to be a
> > > > sister site to the CCED group, as many of the same members are
> > > there, for OT
> > > > subjects, that are not allowed on the CCED list.
> > > > >
> > > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > > POSTING THEM.
> > > > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > > > bill
> > > > > List Mom
> > > > > List Owner
> > > > >
> > > > >
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > > Moderator: pentam@... indigo_red@... davemucha@...
> > [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a
> > sister site to the CCED group, as many of the same members are there,
for
> OT
> > subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>