CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: parallel port

Posted by Trend
on 2004-05-21 22:19:11 UTC
One question though, One of my parallel ports is lpt1 I/O Range: BC00-BC07.

And some of my programs need access via the I/O Range, and the programs only
support the normal"" I/O Ranges:

278-27F,378-37F, and 3BC-something.

Any ideas how I can change the I/O Range for this?

thanks!-Lee




----- Original Message -----
From: "Trend" <fredit@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, May 22, 2004 12:15 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: parallel port


> AHA! Alright, figured it out.
> I am using VBPortTest and just needed to toggle BiDirectional
> comminication...
> Now everything works :)
>
> thanks for the help guys!..
> Lee
>
>
>
>
>
> ----- Original Message -----
> From: "Raymond Heckert" <jnr@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Thursday, May 20, 2004 8:20 PM
> Subject: Re: [CAD_CAM_EDM_DRO] Re: parallel port
>
>
> > As an aside... Check out page 88 of the latest issue of EDN
(Electronics
> > Design News, I think)... Anyways, they show how to use the parallel port
> to
> > directly program a 96-series EPROM chip (maybe it was a 93-series?)
> >
> > RayHex
> >
> > ----------
> > > From: campgems <Don@...>
> > >
> > <snip>
> > > Have you tried hooking a printer up and see if it works?
> > >
> > > The reset state of your LPT port may vary by dirver. I don't now
> > > this to be a fact, but it is worth considering. If a known good
> > > printer works, with the proper drivers installed, your port is OK.
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>

Discussion Thread

Trend 2004-05-19 20:56:19 UTC parallel port campgems 2004-05-19 21:56:58 UTC Re: parallel port Trend 2004-05-19 22:35:28 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port JanRwl@A... 2004-05-19 23:13:16 UTC Re: [CAD_CAM_EDM_DRO] parallel port JanRwl@A... 2004-05-19 23:14:45 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port JanRwl@A... 2004-05-19 23:29:29 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port JanRwl@A... 2004-05-19 23:51:18 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Scott Ellis 2004-05-20 00:01:04 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Hugh Prescott 2004-05-20 06:41:45 UTC Re: [CAD_CAM_EDM_DRO] parallel port wwwmrf 2004-05-20 06:41:46 UTC Re: parallel port turbulatordude 2004-05-20 06:52:10 UTC Re: parallel port - TCNC mayfieldtm 2004-05-20 07:45:48 UTC Re: parallel port D Cranston 2004-05-20 08:12:32 UTC RE: [CAD_CAM_EDM_DRO] Re: parallel port Lester Caine 2004-05-20 08:22:13 UTC Re: [CAD_CAM_EDM_DRO] parallel port jm_fong 2004-05-20 09:10:40 UTC Re: parallel port jm_fong 2004-05-20 09:15:26 UTC Re: parallel port jm_fong 2004-05-20 09:30:52 UTC Re: parallel port Jon Elson 2004-05-20 10:35:15 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Jon Elson 2004-05-20 10:38:48 UTC Re: [CAD_CAM_EDM_DRO] parallel port Alan Marconett 2004-05-20 11:42:45 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Lester Caine 2004-05-20 11:44:12 UTC Re: [CAD_CAM_EDM_DRO] parallel port Alan Marconett 2004-05-20 11:55:37 UTC Re: [CAD_CAM_EDM_DRO] parallel port Paul Davis 2004-05-20 11:56:46 UTC Re: [CAD_CAM_EDM_DRO] parallel port JanRwl@A... 2004-05-20 13:03:47 UTC Re: [CAD_CAM_EDM_DRO] parallel port JanRwl@A... 2004-05-20 13:15:02 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port JanRwl@A... 2004-05-20 13:41:50 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port JanRwl@A... 2004-05-20 13:51:22 UTC Re: [CAD_CAM_EDM_DRO] parallel port JanRwl@A... 2004-05-20 14:00:27 UTC Re: [CAD_CAM_EDM_DRO] parallel port Alan Marconett 2004-05-20 14:43:01 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Alan Marconett 2004-05-20 15:25:07 UTC RE: I/O CODE was: [CAD_CAM_EDM_DRO] parallel port JanRwl@A... 2004-05-20 21:00:33 UTC Re: I/O CODE was: [CAD_CAM_EDM_DRO] parallel port Raymond Heckert 2004-05-21 07:41:07 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Alan Marconett 2004-05-21 09:26:44 UTC Re: I/O CODE was: [CAD_CAM_EDM_DRO] parallel port Trend 2004-05-21 20:16:06 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Trend 2004-05-21 21:21:59 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Trend 2004-05-21 22:19:11 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Jon Elson 2004-05-22 20:45:45 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port Trend 2004-05-23 00:10:26 UTC Re: [CAD_CAM_EDM_DRO] Re: parallel port turbulatordude 2004-05-23 00:43:14 UTC Re: parallel port - assigning ID's jmkasunich 2004-05-24 06:24:01 UTC Re: parallel port