CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Can anyone recommend a vacuum for the machine shop?

Posted by josef wagner
on 2004-08-22 01:10:09 UTC
good morning dough
dont do it in this way.
first a vacuum cleaner needs a fan or booster ventilator which can operate
at a suction pressure
of at least minus 5 meter water collumng!
second: you have written correct here your concern about hard metal pieces,
and these will cut holes
in any type of fabric filter. so this high vacuum cleaner must have as a
first stage cutt off cleaner a
cyclone scrubber.
there are a lot of absolutely suitable ones for industrial application on
the market. i do know only
german of coarse, and here is the primus CFG make. they have some
installations with oebb (austrian
federal railway system) and their appartus works perfectly.
best greetings from vienna, austria
josef wagner

----- Original Message -----
From: "miguel_cubillas" <miguel-cubillas@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, August 22, 2004 9:54 AM
Subject: [CAD_CAM_EDM_DRO] Re: Can anyone recommend a vacuum for the machine
shop?


> FAQ:
> Yahoo! Groups Links
>
>
>
>
>

Discussion Thread

miguel_cubillas 2004-08-21 13:06:39 UTC Can anyone recommend a vacuum for the machine shop? Tom Hubin 2004-08-21 13:54:41 UTC Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-21 14:59:50 UTC Re: Can anyone recommend a vacuum for the machine shop? Jon Elson 2004-08-21 21:46:59 UTC Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-21 23:04:23 UTC Re: Can anyone recommend a vacuum for the machine shop? Doug Chartier 2004-08-22 00:06:48 UTC Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-22 00:54:13 UTC Re: Can anyone recommend a vacuum for the machine shop? josef wagner 2004-08-22 01:10:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-22 01:54:39 UTC Re: Can anyone recommend a vacuum for the machine shop? JanRwl@A... 2004-08-28 19:34:10 UTC Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop? Stephan Kotze 2004-08-29 23:41:14 UTC Re: Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-30 12:58:45 UTC Re: Can anyone recommend a vacuum for the machine shop?