Re: Can anyone recommend a vacuum for the machine shop?
Posted by
miguel_cubillas
on 2004-08-30 12:58:45 UTC
Thanks Stephan.
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Stephan Kotze <skotze@r...>
wrote:
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Stephan Kotze <skotze@r...>
wrote:
>rather
>
> If you have a compressor or compressed air in the shop, I would
> recommend the units that create a vacuum on a 44Gal drum. TheVacuum unit
> screws onto the small bung hole and the vacuum hose onto the largeside. It
> pulls all the muck directly into the drum which is easy todispose. Also, it
> contains no moving parts, so they last a lifetime.
>
> Stephan
> South Africa
Discussion Thread
miguel_cubillas
2004-08-21 13:06:39 UTC
Can anyone recommend a vacuum for the machine shop?
Tom Hubin
2004-08-21 13:54:41 UTC
Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-21 14:59:50 UTC
Re: Can anyone recommend a vacuum for the machine shop?
Jon Elson
2004-08-21 21:46:59 UTC
Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-21 23:04:23 UTC
Re: Can anyone recommend a vacuum for the machine shop?
Doug Chartier
2004-08-22 00:06:48 UTC
Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-22 00:54:13 UTC
Re: Can anyone recommend a vacuum for the machine shop?
josef wagner
2004-08-22 01:10:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-22 01:54:39 UTC
Re: Can anyone recommend a vacuum for the machine shop?
JanRwl@A...
2004-08-28 19:34:10 UTC
Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop?
Stephan Kotze
2004-08-29 23:41:14 UTC
Re: Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-30 12:58:45 UTC
Re: Can anyone recommend a vacuum for the machine shop?