Re: Can anyone recommend a vacuum for the machine shop?

Thanks for the information Josef.

Do you have a website URL, or link, for the Primus CFG? I was not
able to find anything on the internet myself.

Miguel


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "josef wagner" <josef-
wagner@c...> wrote:

> good morning dough
> dont do it in this way.
> first a vacuum cleaner needs a fan or booster ventilator which can

operate

> at a suction pressure
> of at least minus 5 meter water collumng!
> second: you have written correct here your concern about hard

metal pieces,

> and these will cut holes
> in any type of fabric filter. so this high vacuum cleaner must

have as a

> first stage cutt off cleaner a
> cyclone scrubber.
> there are a lot of absolutely suitable ones for industrial

application on

> the market. i do know only
> german of coarse, and here is the primus CFG make. they have some
> installations with oebb (austrian
> federal railway system) and their appartus works perfectly.
> best greetings from vienna, austria
> josef wagner
>
> ----- Original Message -----
> From: "miguel_cubillas" <miguel-cubillas@c...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Sunday, August 22, 2004 9:54 AM
> Subject: [CAD_CAM_EDM_DRO] Re: Can anyone recommend a vacuum for

the machine

> shop?
>
>
> > FAQ:
> > Yahoo! Groups Links
> >
> >
> >
> >
> >