CAD CAM EDM DRO - Yahoo Group Archive

Re: Can anyone recommend a vacuum for the machine shop?

on 2004-08-21 23:04:23 UTC
Thanks Jon.

Miguel

--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jon Elson <elson@p...> wrote:
> miguel_cubillas wrote:
>
> >Can anyone out there recommend a vacuum cleaner for the home
machine
> >shop? I'm mainly interested in being able to suck up metal chips
out
> >of hard to reach places on my lathe and milling machines. Is a 2-
> >stage model required for this type of application?
> >
> >
> I've used several shop vac machines over the years (wore them
out). They
> have all been single-stage vacuum motors. I use the crevice tool
that
> came with them a lot for small places like the table slots on the
mill.
> If you
> do it right, you can put your hand or a piece of material over the
slot
> and vacuum
> out the whole slot without moving the nozzle.
>
> It doesn't work so well on long, stringy lathe curls, as they wad
up and
> block
> the hose. Otherwise, though, it works great on all the sorts of
debris that
> machining creates.
>
> Jon

Discussion Thread

miguel_cubillas 2004-08-21 13:06:39 UTC Can anyone recommend a vacuum for the machine shop? Tom Hubin 2004-08-21 13:54:41 UTC Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-21 14:59:50 UTC Re: Can anyone recommend a vacuum for the machine shop? Jon Elson 2004-08-21 21:46:59 UTC Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-21 23:04:23 UTC Re: Can anyone recommend a vacuum for the machine shop? Doug Chartier 2004-08-22 00:06:48 UTC Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-22 00:54:13 UTC Re: Can anyone recommend a vacuum for the machine shop? josef wagner 2004-08-22 01:10:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-22 01:54:39 UTC Re: Can anyone recommend a vacuum for the machine shop? JanRwl@A... 2004-08-28 19:34:10 UTC Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop? Stephan Kotze 2004-08-29 23:41:14 UTC Re: Can anyone recommend a vacuum for the machine shop? miguel_cubillas 2004-08-30 12:58:45 UTC Re: Can anyone recommend a vacuum for the machine shop?