Re: Can anyone recommend a vacuum for the machine shop?
Posted by
Stephan Kotze
on 2004-08-29 23:41:14 UTC
If you have a compressor or compressed air in the shop, I would rather
recommend the units that create a vacuum on a 44Gal drum. The Vacuum unit
screws onto the small bung hole and the vacuum hose onto the large side. It
pulls all the muck directly into the drum which is easy to dispose. Also, it
contains no moving parts, so they last a lifetime.
Stephan
South Africa
recommend the units that create a vacuum on a 44Gal drum. The Vacuum unit
screws onto the small bung hole and the vacuum hose onto the large side. It
pulls all the muck directly into the drum which is easy to dispose. Also, it
contains no moving parts, so they last a lifetime.
Stephan
South Africa
Discussion Thread
miguel_cubillas
2004-08-21 13:06:39 UTC
Can anyone recommend a vacuum for the machine shop?
Tom Hubin
2004-08-21 13:54:41 UTC
Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-21 14:59:50 UTC
Re: Can anyone recommend a vacuum for the machine shop?
Jon Elson
2004-08-21 21:46:59 UTC
Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-21 23:04:23 UTC
Re: Can anyone recommend a vacuum for the machine shop?
Doug Chartier
2004-08-22 00:06:48 UTC
Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-22 00:54:13 UTC
Re: Can anyone recommend a vacuum for the machine shop?
josef wagner
2004-08-22 01:10:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-22 01:54:39 UTC
Re: Can anyone recommend a vacuum for the machine shop?
JanRwl@A...
2004-08-28 19:34:10 UTC
Re: [CAD_CAM_EDM_DRO] Can anyone recommend a vacuum for the machine shop?
Stephan Kotze
2004-08-29 23:41:14 UTC
Re: Can anyone recommend a vacuum for the machine shop?
miguel_cubillas
2004-08-30 12:58:45 UTC
Re: Can anyone recommend a vacuum for the machine shop?