Re: [CAD_CAM_EDM_DRO] nema 34 motors on BP series 1 conversion

feck123 wrote:

>Hi...was hoping to get some opinions /advice on whether it is worth
>it to use these motors from e-bay-thay are nema 34 mount-or keep
>trying to find some others/bigger ones ?I do not know where to find
>any other reasonably priced motors for my bridgeport cnc
>conversion...also,what would you recommend for the drives? rutex or
>the geckos? IF there is anybody that sells a whole setup that would
>be awesome but ANY help is greatly appreciated!! thanx Mike
>
>http://cgi.ebay.com/ws/eBayISAPI.dll?
>ViewItem&category=71400&item=3841702374&rd=1&ssPageName=WDVW
>
>
>
>

Bigger??? You mean 110 In-Lb (1760 In-Oz) is not enough? Are you intending
to use the machine as a sideways arbor press? I think you can buckle your
leadscrews with this motor! Do you really apply 36 Lbs of force on the
handles on your machine when cutting? If so, use a 2:1 or 3:1 belt
reduction
drive and you can't possibly not have enough torque.

Jon