Re: [CAD_CAM_EDM_DRO] nema 34 motors on BP series 1 conversion

Go to
http://stores.ebay.com/REA-Technologies-Online-Store_W0QQsspagenameZl2QQtZkm
a new Slo/Syn 1700 oz in NEMA 42 can be bought using buy it now for $120...
usually less at auction. They will cut a deal on multiple motors.

----- Original Message -----
From: "Jon Elson" <elson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, September 24, 2004 10:26 PM
Subject: Re: [CAD_CAM_EDM_DRO] nema 34 motors on BP series 1 conversion


>
> R Rogers wrote:
>
> >Jon Elson <elson@...> wrote:
> >feck123 wrote:
> >
> >
> >
> >>Hi...was hoping to get some opinions /advice on whether it is worth
> >>it to use these motors from e-bay-thay are nema 34 mount-or keep
> >>trying to find some others/bigger ones ?I do not know where to find
> >>any other reasonably priced motors for my bridgeport cnc
> >>conversion...also,what would you recommend for the drives? rutex or
> >>the geckos? IF there is anybody that sells a whole setup that would
> >>be awesome but ANY help is greatly appreciated!! thanx Mike
> >>
> >>http://cgi.ebay.com/ws/eBayISAPI.dll?
> >>ViewItem&category=71400&item=3841702374&rd=1&ssPageName=WDVW
> >>
> >>
> >>
> >>
> >>
> >>
> >Bigger??? You mean 110 In-Lb (1760 In-Oz) is not enough?
> >
> >/// Where did 110 in/lb come from? I read the ad and it is misleading.
The motors are listed for 5 amps continuous. Then it goes on to report what
they would do at 10 amps.
> >
> You're right, the ad says something about up to 20 A, but then somewhere
> else says 10 A max.
>
> Jon
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>